203217 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJIM

RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
16,66 [.656]
PCB EDGE
LP
15,88 [.625]
1
8
21,59 [.850] MAX
C
11,43 ±0,13 [.450]
10,89 [.429]
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE)
TOL ±0.05 [.002] UNLESS NOTED
1,27 [.050]
0,64 [.025]
2,54 [.100]
PCB
TD0+ P1
TD0- P2
TD1+ P3
TD1- P6
ELECTRICAL SCHEMATICS 1000 BASE T - M5B02
ELEKTRISCHER SCHALTPLAN
4X 0.01 µF
4X 75 _Ω
CABLE
J1 MX0+
J2 MX0-
J3 MX1+
J6 MX1-
1
0,89 ^{±1,06,300,72±50[} _{,±007.,0[0375[].0X61.301]2X8]2X2}
10
TD2+ P4
TD2- P5
TD3+ P7
TD3- P8
J4 MX2+
J5 MX2-
J7 MX3+
J8 MX3-
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8µm [30µin], OVER Ni
TERMINAL FINISH: Sn MATTE _C
MECHANICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
ELECTRICAL CHARACTERISTICS
CONTACT RESISTANCE: 30 MILLIOHMS MAX
OPERATING TERMPERATURE: 0°C TO 70°C
11,43 [.450]
15,49 [.610]
VCC P9
GND P10
NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
1000pF/2KV
SHIELD
MAGNETICS SPECIFICATIONS @ 25°C
TURNS RATIO:
1CT:1CT ±3%
OCL(100 KHz, 0.1 V, 8 mA) 350 µH MIN
INSERTION LOSS:
1-100 MHz
-1.1 dB MAX
RETURN LOSS:
1-40 MHz
-18 dB MIN
60 MHz
-14 dB MIN
80 MHz
100 MHz
-12 dB MIN
-10 dB MIN
CROSSTALK:
1-100 MHz
CMR:
0.1 - 30 MHz
30 - 60 MHz
60 - 100 MHz
ISOLATION
-35 dB TYP
-50 dB TYP
-40 dB TYP
-35 dB TYP
1500 Vrms
Information:
SCHEMATIC NUMBER: M5B02
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
C
Index
02.06.2008
Date
Tolerances
Scale
2:1
All Dimensions
in mm
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJIM
8C10T, 1x1, INTEGRATED MAGNETICS
www.ERNI.com
203217
I (1/1)
A3
Class
MJIM