203157 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJIM

59,09 2,326
3 x 13.97[0.550] = (41,91 1,650 )
1
8
1
8
1
8
1
8
53,34 ±0,13 2,100 ±0,005
RECOMMENDED PCB LAYOUT - COMPONENT SIDE VIEW
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTÜCKUNGSSEITE)
ALL TOLERANCES ±0.05 [.002] UNLESS NOTED
52,07 2,050
40,64 1,600
38,10 1,500
26,67 1,050
24,13 0,950
12,70 0,500
10,16 0,400
8
8
1
1
1
1,27 0,050
8
8
1
2,54 0,100
0,89 ±0,07 0,035 ±0,003 x32
2,73 0,107
53,34 2,100
2,73 0,107
10,89 0,429
3,25 ±0,07 0,128 ±0,003 x2
1,60 ±0,07 0,063 ±0,003 x5
MATERIALS AND FINISH
HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK
SHIELDING: Cu ALLOY, PLATED WITH Ni
CONTACTS: PHOSPHOR BRONZE
CONTACT FINISH: Au, 0.8µm [30µin] OVER Ni
TERMINAL FINISH: Sn MATTE
MECHANICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
OPERATING TERMPERATURE: 0°C TO 70°C
NOTE 1: SIDE SHIELD TABS IN FRONT 3.68mm (F2)
NOTE 2: REAR SHIELD TABS BETWEEN EACH PORT (T)
NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
NOTE 4: RoHS COMPLIANT
Information:
SCHEMATICS NUMBER: M2A01
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
E
Index
02.05.2006
Date
Tolerances
Scale
2:1
All Dimensions
in mm [in]
Designation
Subject to modification without
prior notice.
MOD JACK - MJIM
Drawing will not be updated. _{8C8T, 1x4, INTEGRATED MAGNETICS}
www.ERNI.com
203157
I (1/2)
A3
Class
MJIM