166785 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJR

87,00 3,425
5 X 13.97 =69(,85 2,750 )
1
8
1
8
1
8
1
8
1
8
1
8
81,28 ±0,13 3,200 ±0,005
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
87,95 ±0,20 3,463 ±0,008
TOP OF PCB
LP
10,89 0,429
IMPROVED CONTACT DESIGN
(PRE BEND)
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Me chanical pro pe rtie s
.
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 n
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 VDC/VAC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 VDC/VAC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
NOTE
NOTE
NOTE
NOTE
NOTE
1: SIDE SHIELD PINS IN FRONT (3,68mm)
2: REAR GROUNDING PINS BETWEEN EVERY OTHER PORT (P)
3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
4: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
5: RoHS COMPLIANT
Information:
Tolerances
Scale
2:1
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
A
Index
28.06.2007
Date
All Dimensions
in mm[in]
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJR
8P8C, 1X6, CATEGORY 5E
www.ERNI.com
133785
I (1/2)
A3
Class
MJ