133947 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJR

53,34 ±0,13 2,100 ±0,005
0,35 0,014
59,06 2,325
3 X 13.97 =41(,91 1,650 )
1
18
18
18
8
53,34 ±0,13 2,100 ±0,005
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
60,19 ±0,20 2,370 ±0,008
TOP OF PCB
LP
10,89 0,429
IMPROVED CONTACT DESIGN
(PRE BEND)
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
52,07 2,050
38,10 1,500
26,67 1,050
24,13 0,950
10,16 0,400
8
8
8
8
1
1
1,27 0,050
2,54 0,100
2,73 0,107
1
1
X32
0,89 ^±0₃^,_,⁰₂⁷_50±^,₀⁰_,0³_715,60^±₀⁰_,1^,0±2^{0083,0±70,}₀⁰⁰_,0³_63X±²_0,003 ^X5
2,73 0,107
53,34 2,100
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Me chanical pro pe rtie s
.
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
NOTE 1: SIDE SHIELD PINS IN FRONT (3,68 mm9
NOTE 2: ONE REAR GROUNDING PIN
NOTE 3: PANEL GROUND FLANGES TOP, BOTTON, SIDES (GF5)
1:1
NOTE 4: RoHS COMPLIANT
PART NO.
IDENT. NR.
TRANSMISSION REQUIREMENT
ÜBERTRAGUNGSANFORDERUNG
CONTACT DESIGNE
133209
CATEGORY 3/4
N.A.
133218
CATEGORY 5
Improved contact
Design (pre Bend)
Information:
Tolerances
Scale
2:1
ISO 2768-m
DIN 7167
All Dimensions
in mm[in]
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
A
Index
04.07.2007
Date
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJR
8P8C, 1X4
www.ERNI.com
Class
133947
MJ
I (1/1)
A3