133943 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJR

15,88 0,625
1
8
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,66 0,656
PCB EDGE
LP
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
13,6,2005,_±⁸_0±⁹_{,00,7±070,0}⁰⁰⁷_{,0,16023,80±}³Â±0⁵0,0,0±00303,00_X³_X22X8
1,27 0,050
0,635 0,025
2,54 0,100
2 4 68
1357
IMPROVED CONTACT DESIGN
(PRE BEND)
11,43 0,450
15,49 0,610
11,43 0,450
2,54 0,100
3,05 0,120
10,89 0,429
1:1
NOTE 1: SIDE SHIELD PINS IN Front 3.05 mm (F)
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
NOTE 3: RoHS COMPLIANT
PART NO.
ART.- NR.
TRANSMISSION
CATEGORY
INSULATION
BODY
SUITABLE ASSEMBLY
PROCESS (LEADFREE)
SOLDER
TEMPERTURE
( MAX)
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Mechanical properties
.
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations
IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
Approvals
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
203513 CAT 5
133172 ^{CAT 5}
Information:
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
D
Index
13.08.2009
Date
PA6T/66 FR52 30%
PBT 30%
reflow
wave
260°C at 10s
(acc. to IEC 60068-2-20)
235°C at 3-5s
Tolerances
x.xx ±0,25
All Dimensions
in mm [in]
Subject to modification without
prior notice.
Drawing will not be updated.
Scale
2:1
Designation
MOD JACK - MJR
8P8C, 1X1
www.ERNI.com
133943
I (1/1)
A3
Class
MJ