133888 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJD

81,28 ±0,13 3,200 ±0,005
IMPROVED CONTACT DESIGN
(PRE BEND)
87,13 3,430
5 x 13.97 [.550] = (69,825,750 )
8
1
8
1
8
1
8
1
8
1
8
1
28,50 1,122 MAX
1
8
1
8
1
8
1
8
1
8
1
8
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PA66
Mechanical properties
.
Contact material
Standard description CuSn8
Insertion/withdrawal force IEC 603-7
max. N.A.
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description X3CrNiN17-8
coupling device IEC 512-8, 15f
N.A.
Shell/shield plating
Thickness of plating N.A.
Electrical properties
Cre e page / cle arance distance s
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
N.A.
Solder temperature
235°C at 10s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro val s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
10,89 0,429
NOTE
NOTE
NOTE
NOTE
1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9)
2: GROUNDING PINBETWEEN EACH PORT (T)
3: 3 SIDE GROUND PINSEACH SIDE, STAGGERED (S1)
4: RoHS COMPLIANT
PART NO.
IDENT. NR.
TRANSMISSION REQUIREMENT
ÜBERTRAGUNGSANFORDERUNG
133076
Information:
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
B
Index
09.07.2007
Date
CATEGORY 5E
Tolerances
Scale
2:1
All Dimensions
in mm [in]
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJD
8P8C, 2X6
www.ERNI.com
Class
133888
MJ
I (1/2)
A3