133880 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJD

IMPROVED CONTACT DESIGN
(PRE BEND)
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
7531
10,16 0,400
2,54 0,100
1,27
0,050
0,89 ^±0,07
0,035 ^±0,003
x16
864 2
24 6 8
13 5 7
2,13 0,084
2,79 0,110
11,43 0,450
1,630,2_±0⁵_{,0±70,007,006,312±80,0±003,003x6 x2}
2,13 0,084
2,79 0,110
PART NO.
IDENT. NR.
TRANSMISSION
CATEGORY
133039
CAT 5
203517
CAT 5e
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc.JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations
IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description SUS301 (acc.JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating N.A.
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
11,43 0,450
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
17,78 min.
17,27 0,680
1,60 0,063
8
1
TOP OF PCB
LP
28,50 1,122 MAX
1
8
4,57 0,180
5,85 0,230
10,89 0,429
9,15 0,360
11,40 0,449
15,46 0,609
1:1
NOTE 1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9)
Information:
Tolerances
Scale
2:1
^ X,XX = ±0,25 All Dimensions
in mm[in]
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJD
8P8C, 2x1
before using.
www.ERNI.com
133880
c
20.05.2010
A3
Index
Date
Class