133868 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJR

87,00 3,425
5 X 13.97 =69(,85 2,750 )
1
8
1
8
1
8
1
8
1
18
8
81,28 ±0,13 3,200 ±0,005
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
87,95 ±0,20 3,463 ±0,008
TOP OF PCB
LP
10,89 0,429
IMPROVED CONTACT DESIGN
(PRE BEND)
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
NOTE
NOTE
NOTE
NOTE
1: SIDE GROUNDIND PINS IN FRONT (3,68 mm)
2: REAR GROUNDING PINS BETWEEN EVERY PORT (T)
3: PANEL GROUND FLAGNES BOTH SIDES AND TOP (GF5)
4: RoHS COMPLIANT
PART NO.
IDENT. NR.
TRANSMISSION REQUIREMENT
ÜBERTRAGUNGSANFORDERUNG
CONTACT FINISH
OBERFLÄCHENBEHANDLUNG
133222
CATEGORY 5
0,8µm Au [30µin], OVER Ni
Information:
Tolerances
Scale
2:1
All Dimensions
in mm[in]
All rights reserved.
Designation
Only for Information.
Subject to modification without
To ensure that this is the latest prior notice.
version of this drawing, please Drawing will not be updated.
contact one of the ERNI companies
before using.
A
27.06.2007
www.ERNI.com
Index
Date
Class
MOD JACK - MJR
8P8C, 1x6, CAT 5
133868
MJ
I (1/2)
A3