133840 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJLS

1,27 x 7 = 8,89[0,035]
15,74
1
8
18,65 0,734
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
8,89 0,35
1,27 0,05
0,89 _{0,035 x 8}
24 6 8
1 35 7
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,66 0,656
13,6,205[0,00,61238]
x
x
2
2
11,43 0,45
15,54 0,612
Top of pcb
11,43 0,45
2,54 0,1
2,97 0,117
8,89 0,35
8,13 0,32
NOTE 1: PANEL GROUND FLANGES BOTH SIDES AND BOTTOM
NOTE 2: SIDE SHIELDING TAPS IN FRONT
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating see chart
Mechanical operations
IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 [V AC/DC]
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 [V AC/DC]
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1.5 [A] @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 [mOhm]
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 [MOhm]
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
IMPROVED CONTACT DESIGN
(PRE BEND)
Part No.
Contact finish
Ident-Nr. Oberflächenbehandlung
Information:
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
c
Index
21.10.2010
Date
133269 ^{30µm Au over 50µm Ni}
Tolerances
Scale
2:1
Fraction Decimals Angles
X ±0.50 ± 1°
X.X ±0.38
X.XX ±0.25
X.XXX ±0.10
All Dimensions
in mm
Designation
Subject to modification without
prior notice.
MOD JACK - MJLS
Drawing will not be updated.
1x1, 8P8C, SHIELDED
www.ERNI.com
133840
I (1/1)
A3
Class
MJIM