133810 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJR

53,34 ±0,13 2,100 ±0,005
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
59,97 ±0,20 2,361 ±0,008
TOP OF PCB
LP
0,35 0,014
59,06 2,325
3 x 13.97 =41(,91 1,650 )
STANDOFF
ABSTAND
IMPROVED CONTACT DESIGN
(PRE BEND)
1
8
1
8
1
8
1
8
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
52,07 2,050
40,64 1,600
38,10 1,500
26,67 1,050
24,13 0,950
12,70 0,500
10,16 0,400
8
1
1
8
8
8
1
1
1,27 0,050
2,54 0,100
0,89 ±0,07 0,035 ±0,003 x32
3,25 ±0,07 0,128 ±0,003 x2
2,73 0,107
1,60 ±0,07 0,063 ±0,003 x5
53,34 2,100
2,73 0,107
3,69 0,145
10,89 0,429
NOTE 1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF5)
NOTE 2: GROUNDING PIBNETWEEN EACH PORT (T)
NOTE 3: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
1:1
NOTE 4: RoHS COMPLIANT
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 MM
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
PART NO.
IDENT. NR.
133919
133496
Information:
TRANSMISSION REQUIREMENT
ÜBERTRAGUNGSANFORDERUNG
CATEGORY 5
CATEGORY 5E
Tolerances
Scale
2:1
All Dimensions
in mm[in]
All rights reserved.
Designation
Only for Information.
Subject to modification without
To ensure that this is the latest prior notice.
version of this drawing, please Drawing will not be updated.
contact one of the ERNI companies
before using.
G
29.08.2007
www.ERNI.com
Index
Date
Class
MOD JACK - MJR
8P8C, 1X4
133810
MJ
I (1/1)
A3