133776 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK

STANDOFF
ABSTAND
13,90
+0,25
- 0,25
0,547
+0,010
- 0,010
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
15,39 ±0,30 0,606 ±0,012
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
TOP OF PCB
LP
1,27 0,050
2,54 0,100
0,635 0,025
21,60
+0,20
- 0,30
0,850
+0,008
- 0,012
1
6
1
6
10,16 ±0,13 0,400 ±0,005
3,05 0,120
10,89 ±0,20 0,429 ±0,008
10,16 0,400
13,5 0,531
Technical specifications
Materials & Finish
Standard applic. Value
Insulation body
Standard description PBT 30%
Contact material
Standard description CuSn5
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Contact finish termination zone Thickness of plating 30 µin Au over 50 µin Ni
Shell/shield material
Standard description C2680 (acc. JIS)
Shell/shield plating
Thickness of plating 50 µin Ni
Assembly process
Packaging
Solder temperature
Suitable assembly process
Tray
235°C at 3-5s
wave
Ap p ro v al s
UL insulation body
UL File No.
RoHS compliant
UL 94
V0
E145613
Yes
Test Data
Standard applic. Value
Mechanical properties
Insertion/withdrawal force IEC 603-7
max. 20 N
Mechanical operations
IEC 512-5, 9a min. 1.000
Effectiveness of connector
coupling device IEC 512-8, 15f
50 N
Electrical properties
Creepage / clearance distances
a) Contact - contact
IEC 807-3
0,57 mm
b) Contact - shell
IEC 807-3
min. 1,0 mm
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
Contact resistance
IEC 512-2, 2a max. 30 mOhm
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
Environmental properties
Operation temperature
0 - 70° C
NOTE 1: PANEL GROUND FLANGES TOP, SIDES AND BOTTOM (GF5)
NOTE 2: RoHS COMPLIANT
PART NO.
IDENT. NR.
133776
Information:
CONTACT FINISH
TERMINATION ZONE
ROUND WIRE CONTACTS
30µin Au OVER 50µinNi
Tolerances
1:1
Scale
2:1
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
To insure that this is the latest
Subject to modification without
prior notice.
MOD JACK
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
6P6C, 1X1, SHIELDED
before using.
www.ERNI.com
133776
I (1/1)
C
19.08.2008
A3
Index
Date
Class
MJ