133726 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJR

53,34 ±0,13 2,100 ±0,005
0,35 0,014
59,06 2,325
3 X 13.97 =41(,91 1,650 )
1
8
1
81
8
1
8
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
59,97 ±0,25 2,361 ±0,010
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
TOP OF PCB
LP
10,89 0,429
IMPROVED CONTACT DESIGN
(PRE BEND)
52,07 2,050
38,10 1,500
24,13 0,950
10,16 0,400
2,54 0,100
1,27 0,050
8
1
1
2,73 0,107
8
8
8
1
1
X32
0,035 ^±0,003
X2
0,89
±0,07
3,25
0,128
±0,07
1,60 ^±0,07
±0,003
0,063
±0,003
X2
53,34 2,100
2,73 0,107
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
.
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Cre e page / cle arance distance s
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
N.A.
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro val s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
1:1
NOTE 1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF5)
NOTE 2: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
NOTE 3: RoHS COMPLIANT
Information:
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
A
Index
28.06.2007
Date
Tolerances
ISO 2768-m
DIN 7167
All Dimensions
in mm[in]
Subject to modification without
prior notice.
Drawing will not be updated.
Scale
2:1
Designation
MOD JACK - MJR
8P8C, 1X4, CATEGORY 5
www.ERNI.com
Class
133726
MJ
I (1/1)
A3