133701 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJLS

1,27 0,050
15,74 0,620
1
8
11,43 ±0,13 0,450 ±0,005
18,67 0,735
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
2,54 0,100
1,27 0,050
0,64 0,025
8
1
0,89 ±0,07 0,035 ±0,003
3,25 ±0,07 0,128 ±0,003
1,60 ±0,07 0,063 ±0,003
8,13 0,320
11,43 0,450
15,54 0,612
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,66 0,656
TOP OF PCB
LP
IMPROVED CONTACT DESIGN
(PRE BEND)
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating see chart
Mechanical operations
IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
Approvals
Current carrying capacity IEC 512-3, 5b
1.5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
1:1
NOTE 1: PANEL GROUND FLANGES BOTH SIDES, BOTTOM AND TOP (GF5)
NOTE 2: RoHS COMPLIANT
Information:
PART NO.
IDENT. NR.
133271
Tolerances
Scale
CONTACT FINISH
OBERFLÄCHENBEHANDLUNG
0,8µm Au [30µin], OVER 1,25 [50µin]Ni
2:1
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
To insure that this is the latest
Subject to modification without
prior notice.
MOD JACK - MJLS
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
8P8C, 1X1
before using.
www.ERNI.com
133701
I (1/1)
F
29.08.2007
A3
Index
Date
Class
MJ