133442 Datasheet, PDF (1/1 Pages) ERNI Electronics – Mod Jack - MJIDC

Materials & Finish
Plastic housing (see ref. 1)
IDC housing (see ref. 3)
IDC cap (see ref. 5)
Contact material, mating zone (see ref. 2)
Contact finish, mating zone (see ref. 2)
Contact material, IDC terminals (see ref. 4)
Contact finish, IDC terminals (see ref. 4)
Shell/shield material
Standard
applicable Tolerance
Standard description
Standard description
Standard description
Standard description
Thickness of plating
Standard description
Thickness of plating
Standard description
ABS & PC, UL 94V-0
PC, UL 94V-2
PC, UL 94V-2
Phosphor bronze, C5210
50µin Au over 50-60µin Ni
Phosphor bronze, C5210
50µin Sn over 50-60µin Ni
Brass C2680, Ni plated
Mechanical properties
Insertion force
IEC 60603-7
Retention strength (between jack and plug)
Mechanical operations (mating & unmating) IEC 60512-5, 9a
IDC punching times
max.
0.9 N
7.7 N
min. 750 (at 20 cycles/minute)
max.
200
Cable termination
Conductor cross-section
Wire diameter (outer dia.)
AWG 23-24, solid wire
max.
1,4 mm
Environmental properties Operating temperature
-40°C to +80°C
Performance
Transmission category
compl. ANSI/TIA/EIA 568B.2
CAT5e
Electrical properties
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 60512-2, 4a
b) Contact - shell/ testpanel
IEC 60512-2, 4a
Current carrying capacity (Current Rating)
IEC 60512-3, 5b
Contact resistance
IEC 60512-2, 2a
Insulation resistance
IEC 60512-2, 3a
min.
min.
max.
min.
1.000 V AC/DC
1.500 V AC/DC
1.5 A @ 25°C
30 mOhms
500 MOhms
Packaging
Packaging
bag
Approvals
RoHS compliant
Yes
PIN ASSIGNMENTS EIA / TIA T568 A & B
T568 A
T568 B
PIN WIRE COLOR
PIN WIRE COLOR
1 WHITE/GREEN
2
GREEN
1 WHITE/ORANGE
2
ORANGE
Set contains:
- Modular IDC Jack (1 pcs)
- Press-in tool (not shown; 1 pcs)
- Cable tie (not shown; 1 pcs)
3 WHITE/ORANGE 3
6
ORANGE
6
4
BLUE
4
WHITE/GREEN
GREEN
BLUE
Notes:
1. The IDC color codes allow wiring according to TIA/EIA T568A and T568 B
2. Mates with modular plug 8P8C
5 WHITE/BLUE
7 WHITE/BROWN
8
BROWN
5 WHITE/BLUE
7 WHITE/BROWN
8
BROWN
Information:
Tolerances
Scale
1:1
All rights reserved.
Only for Information.
To ensure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
A
Index
27.01.2009
Date
All Dimensions
in mm [in]
Designation
Subject to modification without
prior notice.
Mod Jack - MJIDC
Drawing will not be updated. _{KEYSTONE JACK CAT 5e, SHIELDED}
www.ERNI.com
133442
I (1/1)
A3
Class
MJ