133288 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJLS

1,27 0,050
15,74 0,620
1
8
11,43 0,450
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,66 0,656
TOP OF PCB
LP
18,67 0,735
2,50
+0,30
0,00
0,098
+0,012
0,000
8,13 0,320
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
7 X 1,27 = 8,89 0,350
0,76 0,030
1
8
3,30 ±0,07 0,130 ±0,003 X2
1,60 ±0,07 0,063 ±0,003 X2
11,43 0,450
15,54 0,612
IMPROVED CONTACT DESIGN
(PRE BEND)
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Contact material
Standard description PA46 30%
Standard description C5210 (acc. JIS)
Mechanical properties
Insertion/withdrawal force IEC 603-7
max. 20 N
NOTE 1: WITH PEGS, SIDE GROUNDING PINS AND SMT TERMINALS
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations
IEC 512-5, 9a min. 1.000
NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
NOTE 3: RoHS COMPLIANT
1:1
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Information:
Tolerances
Scale
2:1
Assembly process
Packaging
Solder temperature
Suitable assembly process
A p p ro val s
UL insulation body
UL File No.
RoHS compliant
UL 94
Tray
260°C at 3-5s
reflow
V0
E145613
Yes
a) Contact - contact
IEC 807-3
0,52 mm
b) Contact - shell
IEC 807-3
min. 1,0 mm
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
Contact resistance
IEC 512-2, 2a max. 30 mOhm
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
Environmental properties
Operation temperature
-40°C to +85°C
Fraction Decimals
X ±0.50
X.X ±0.38
X.XX ±0.25
X.XXX ±0.10
Angles
± 1°
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
To ensure that this is the latest
Subject to modification without
prior notice.
MOD JACK - MJLS
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
8P8C, 1X1 SMT
before using.
www.ERNI.com
133288
(1/1)
c
21.10.2010
A3
Index
Date
Class
MJ