133054 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK - MJD

39,37 ±0,13 1,550 ±0,005
45,22 1,780
2 x 13,97 [,550] 2=7,94 1,100
8
1
8
1
8
1
1
8
1
8
1
8
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
46,31 ±0,20 1,823 ±0,008
TOP OF PCB
LP
28,50 1,122 MAX
10,89 0,429
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
38,10 1,500
26,66 1,050
24,13 0,950
12,69 0,500
10,16 0,400
2,54 0,100
1,27 0,050
1
1
1
8
8
8
8
8
8
1
1
1
2,13 0,084
2,79 0,110
39,37 1,550
IMPROVED CONTACT DESIGN
(PRE BEND)
2,13
3,25 _±0,07
0,084
0,128 _±0,003
X2
2,79 0,110
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
.
Contact material
Standard description C5210 (acc.JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µ Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Vo ltage pro o f (Die le ctric Withstand Vo ltage )
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
NOTE 1: PANEL GROUND FLANGES TOP, BOTTOM, SIDES (GF9)
NOTE 2: REAR GROUNDING PIN BETWEEN EVERY PORT (T)
NOTE 3: 3 SIDE GROUND PINS EACH SIDE, STAGGERED (S1)
1:1
NOTE 4: C - UL APPROVED E145613 AND MEETS FCC RECQUIREMENTS
NOTE 5: RoHS COMPLIANT
Information:
Tolerances
Scale
2:1
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
B
Index
22.08.2007
Date
All Dimensions
in mm[in]
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK - MJD
8P8C, 2X3, CATEGORY 5
www.ERNI.com
133054
I (1/1)
A3
Class
MJ