133046 Datasheet, PDF (1/2 Pages) ERNI Electronics – MOD JACK - MJD

53,34 ±0,20 2,100 ±0,008
IMPROVED CONTACT DESIGN
(PRE BEND)
59,18 2,330
3 X 13,97 = 41,91 1,650
8
1
8
1
8
1
8
1
28,50 1,122 MAX
1
8
1
8
1
8
1
8
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
.
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating 30 µin Au over 50 µin Ni
Mechanical operations
IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
Ap p ro val s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
0 - 70° C
10,89 0,429
NOTE 1: PANEL GROUND FLANGES TOP; SIDES 8 GF9)
NOTE 2: REAR GROUNDING PIN BETWEEN EVERY PART
NOTE 3: 3 SIDE GROUND PINS EACH SIDE; STAGGERED (S1)
NOTE 4: RoHS COMPLIANT
1:1
NOTE 5: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
Information:
Tolerances
Scale
2:1
All Dimensions
in mm[in]
All rights reserved.
Designation
Only for Information.
To ensure that this is the latest
Subject to modification without
prior notice.
MOD JACK - MJD
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
8P8C, 2X4, CATEGORY 5
before using.
www.ERNI.com
133046
b
20.05.2010
A3
Index
Date
Class
MJ