100203210145 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK- MJD 8P8C

39,37 ±0,13 1,550 ±0,005
45,22 1,780
2 X 13.97 = (27,94 1,100 )
8
1
8
1
8
1
1
8
1
8
1
8
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
45,81 1,804
TOP OF PCB
LP
28,50 1,122 MAX
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
38,10 1,500
26,66[1.050]
24,13 0,950
12,69[.0500]
10,16 0,400
1
1
X48
0,035 ^±0,003
0,89 ^±0,07
1
8
88
88
8
1
1
1
1,60
3,25
±0,07
±0,07 _{0,128 ±0,003}
0,063 _{±0,003 X10}
X2
2,13 0,084
2,79 0,110
39,37 1,550
2,13 0,084
2,79 0,110
IMPROVED CONTACT DESIGN
(PRE BEND)
Technical specifications
Materials & Finish
Insulation body
Contact material
Contact finish, mating zone
Contact finish termination zone
Shell/shield material
Plating shield / shielding pin
Standard applic.
Standard description
Standard description
Thickness of plating
Thickness of plating
Standard description
Value
PBT 30%
C5210 (acc. JIS)
30 µin Au over 50 µin Ni
80 µin matte Sn over 50 µin Ni
C2680 (acc. JIS)
50 µin Ni / 80 µin Sn
Assembly process
Packaging
Solder temperature
Suitable assembly process
Tray
235°C at 3-5s
wave
Approvals
UL insulation body
UL File No.
RoHS compliant
UL 94
V0
E145613
Yes
Test Data
Standard applic. Value
Mechanical properties
.
Insertion/withdrawal force IEC 603-7
max. 20 N
Mechanical operations
IEC 512-5, 9a
min. 1.000
Effectiveness of connector
coupling device IEC 512-8, 15f
50 N
Electrical properties
Creepage / clearance distances
a) Contact - contact
IEC 807-3
0,52 mm
b) Contact - shell
IEC 807-3
min. 1,0 mm
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 512-2, 4a
min. 1.000 V AC/AC
b) Contact - shell/testpanel IEC 512-2, 4a
min. 1.500 V AC/DC
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
Contact resistance
IEC 512-2, 2a max. 30 mOhm
Insulation resistance
IEC 512-2, 3a
min. 500 MOhm
Environmental properties
Operation temperature
0 - 70° C
NOTE 1: GROUNDING PIN BETWEEN EACH PORT - BACKSIDE AND IN THE
CENTER OF THE FRONT AND REAR CONTACT ROWS (S)
NOTE 2: C - UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
NOTE 3: SHIELD TERMINALS TINNED
1:1
NOTE 4: SIDE GROUND PINS EACH SIDE, STAGGERED (S1)
NOTE 5: RoHS COMPLIANT
Information:
Tolerances
Scale
2:1
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
To ensure that this is the latest
Subject to modification without
prior notice.
MOD - JACK - MJ
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
8P8C, 2X3, CATEGORY 5E
before using.
f
28.06.2016
www.ERNI.com
100203210145
1 (1/1)
A3
Index
Date
Class
MJ