100104180003 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK-MJR 8P8C

15,24 0,600
1
8
11,43 ±0,13 0,450 ±0,005
20,57 0,810
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,66 ±0,30 0,656 ±0,012
TOP OF PCB
LP
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL. 0.05 [0.002] UNLESS NOTED
2,54 0,100
1,27 0,050
0,635 0,025
8
1
10,54 0,415
11,43 0,450
Technical specifications
Materials & Finish
Insulation body
Contact material
Contact finish, mating zone
Contact finish termination zone
Shell/shield material
Shell/shield plating
Standard applic.
Standard description
Standard description
Thickness of plating
Thickness of plating
Standard description
Thickness of plating
Value
PBT 30%
CuSn5
30 µin Au over 50 µin Ni
see Chart
N.A.
N.A.
Assembly process
Packaging
Solder temperature
Suitable assembly process
Tray
235°C at 3-5s
wave
Approvals
UL insulation body
UL File No.
RoHS compliant
UL 94
V0
E145613
Yes
Test Data
Standard applic. Value
Mechanical properties
Insertion/withdrawal force IEC 603-7
max. 20 N
Mechanical operations
IEC 512-5, 9a
min. 1.000
Effectiveness of connector
coupling device IEC 512-8, 15f
50 N
Electrical properties
Creepage / clearance distances
a) Contact - contact
IEC 807-3
0,57 mm
b) Contact - shell
IEC 807-3
min. 1,0 mm
Voltage proof (Dielectric Withstand Voltage)
a) Contact - contact
IEC 512-2, 4a
min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a
min. 1.500 V AC/DC
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
Contact resistance
IEC 512-2, 2a max. 30 mOhm
Insulation resistance
IEC 512-2, 3a
min. 500 MOhm
Environmental properties
Operation temperature
0 - 70° C
1:1
NOTE 1 : C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
NOTE 2 : RoHS COMPLIANT
PART NO.
IDENT. NR.
CONTACT FINISH
OBERFLÄCHEN-
BEHANDLUNG
100104180003
Round wire contacts
0,8µm Au [30µin], over 1,27 [50µin] NI
Information:
All rights reserved.
Only for Information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
D
Index
14.01.2008
Date
Tolerances
Scale
2:1
All Dimensions
in mm [in]
Subject to modification without
prior notice.
Drawing will not be updated.
Designation
MOD JACK-MJR
8P8C, 1X1
www.ERNI.com
Class
100104180003
MJ
I (1/!)
A3