100100760012 Datasheet, PDF (1/1 Pages) ERNI Electronics – MOD JACK -MJHV 8P8C

16,38 0,645
15,86 0,624
1
8
2,54 0,100
3,81 0,150
8,89 0,350
6,65 0,262
RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW)
EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE)
TOL ±0,05 mm unless noted
2,54 0,100
1,27 0,050
0,635 0,025
2468
1357
0,89 0,035 x8
1,60 0,063 x2
11,43 0,450
15,66 0,617
3,25 0,128 x2
RECOMMENDED PANEL CUTOUT
EMPFOHLENER FRONTPLATTEN-AUSSCHNITT
16,43 0,647
R0,25 0,010
IMPROVED CONTACT DESIGN
(PRE BEND)
NOTE 1: RoHS COMPLIANT
1:1
PART NO. TRANSMISSION REQUIREMENT
IDENT. NR. ÜBERTRAGUNGSANFORDERUNG
CONTACT FINISH
KONTAKTOBERFLÄCHE
OPERATION TEMPERATURE
BETRIEBSTEMPERATUR
Technical specifications
Materials & Finish
Standard applic. Value
Test Data
Standard applic. Value
Insulation body
Standard description PBT 30%
Mechanical properties
Contact material
Standard description C5210 (acc. JIS)
Insertion/withdrawal force IEC 603-7
max. 20 N
Contact finish, mating zone Thickness of plating see chart
Mechanical operations
IEC 512-5, 9a min. 1.000
Contact finish termination zone Thickness of plating 80 µin matte Sn over 50 µin Ni
Effectiveness of connector
Shell/shield material
Standard description C2680 (acc. JIS)
coupling device IEC 512-8, 15f
50 N
Shell/shield plating
Thickness of plating 50 µin Ni
Electrical properties
Creepage / clearance distances
Assembly process
a) Contact - contact
IEC 807-3
0,52 mm
Packaging
Tray
b) Contact - shell
IEC 807-3
min. 1,0 mm
Solder temperature
235°C at 3-5 s
Voltage proof (Dielectric Withstand Voltage)
Suitable assembly process
wave
a) Contact - contact
IEC 512-2, 4a min. 1.000 V AC/DC
b) Contact - shell/testpanel IEC 512-2, 4a min. 1.500 V AC/DC
A p p ro v al s
Current carrying capacity IEC 512-3, 5b
1,5 A @ 25° C
UL insulation body
UL 94
V0
Contact resistance
IEC 512-2, 2a max. 30 mOhm
UL File No.
E145613
Insulation resistance
IEC 512-2, 3a min. 500 MOhm
RoHS compliant
Yes
Environmental properties
Operation temperature
see chart
100100760012
CAT 5
30 µinAu
-40° to +85°C
Information:
Tolerances
X.XX = ±0,25 mm
Scale
2:1
All Dimensions
in mm [in]
All rights reserved.
Designation
Only for Information.
To ensure that this is the latest
Subject to modification without
prior notice.
MOD JACK - MJHV
version of this drawing, please
Drawing will not be updated.
contact one of the ERNI companies
8P8C, 1X1, VERTICAL
before using.
27.10.2014
www.ERNI.com
100100760012
K
A3
Index
Date
Class
MJ