English
Language : 

VG-4511CA Datasheet, PDF (1/2 Pages) Epson ToYoCom – VOLTAGE -CONTROLLED CRYSTAL OSCILLATOR
Crystal oscillator
VOLTAGE -CONTROLLED CRYSTAL OSCILLATOR (VCXO)
VG - 4511CA
•Frequency range
•Supply voltage
•Absolute pull range
•Thickness
•Function
: 80 MHz to 170 MHz LV-PECL
: 3.3 V
: ±50 × 10-6
: 1.6 mm Typ.
: Output enable(OE)
Actual size
Epson Toyocom
Product Number (please contact us)
X1G002781xxxx00
Specifications (characteristics)
Item
Symbol
Specifications
Output frequency range
fO
80.000 MHz to 170.000 MHz
Supply voltage
VCC
3.3 V ±0.165 V
Storage temperature range
T_stg
-55 °C to +125 °C
Operating temperature range
Frequency tolerance
T_use
f_tol
As per below table.
±50 × 10-6 Max.
Current consumption
Absolute pull range
ICC
APR
70 mA Max.
GCT:±50 × 10-6 Min.
Input resistance
Rin
100 kΩ Min.
Frequency change polarity
-
Positive slope
Symmetry
SYM
40 % to 60 %
High output voltage
VOH
Vcc-1.1 V Min.
Low output voltage
VOL
Vcc-1.5 V Max.
Output load condition (ECL)
L_ECL
LV-PECL
Output enable / disable input VIH
70 % VCC Min.
voltage
Rise time / Fall time
VIL
tr / tf
30 % VCC Max.
1.5 ns Max.
Start-up time
t_str
10 ms Max.
Frequency aging
f_aging
This is included frequency tolerance
* Please keep VC pin open or ground while powering up VCC.
Operating temperature range ç
GGCT
JGCT
KGCT
Operating temperature range
­40 °Cʙ+85 °C
­20 °Cʙ+70 °C
0 °Cʙ+70 °C
External dimensions
(Unit :mm)
7.0±0.2
#6
#5
#4
Remarks
Please contact us for inquiries regarding
available frequencies.
Store as bare product after unpacking
Includes frequency aging (20 years)
No load condition.
VC= 1.65 V ± 1.5 V
DC level
VC= 0 to 3.3 V
–
–
–
VIH or OPEN : Enable
VIL or GND : Disable
20 % VCC to 80 % VCC level
Time at minimum supply voltage to be 0 s
+25 °C, VCC=3.3 V, 20 years
Footprint (Recommended) (Unit :mm)
E 155.520
VAG674A
#1
#2
#3
C=0.1 µF Min. #6
1.8
#5
#4
1.4
C0.5
2.54 2.54
Pin map
Pin
Cconnection
1
Vc
2
OE
3
GND
4
OUT1(Positive)
5
OUT2(Negative)
6
Vcc
Note.
OE Pin
OE pin = "H" or "open" : Specified frequency output.
OE pin = "L" : Output is high impedance, oscillation stops.
C
Resist
#1
#2
#3
5.08
http://www.epsontoyocom.co.jp