SG-771PCD Datasheet, PDF (1/2 Pages) Epson ToYoCom – CRYSTAL OSCILLATOR

Crystal oscillator
CRYSTAL OSCILLATOR
SPXO
ç
SG-771 PCD
•Frequency range
•Supply voltage
•Output
•Thickness
• Features
•Function
: 80 MHz to 175 MHz
: 3.3 V
: LV-PECL
: 1.6 mm Typ.
: Fundamental mode oscillator with HFF-XTAL Actual size
: Output enable (OE)
Epson Toyocom
Product Number (please contact us)
X1G00282xxxxx00
Specifications (characteristics)
Item
Symbol
Specifications
Output frequency range
fO
80.000 MHz to 175.000 MHz
Supply voltage
VCC
Storage temperature range
T_stg
Operating temperature range T_use
Frequency tolerance
f_tol
Current consumption
ICC
Symmetry
SYM
High output voltage
VOH
Low output voltage
VOL
Output load condition (ECL) L_ECL
Output enable / disable input VIH
voltage
VIL
Rise time / Fall time
tr / tf
Start-up time
T_str
Frequency aging
f_aging
*1 Rise time (or 3.15 V) of VCC > 150 µs.
3.3 V ±0.165 V
-55 °C to +125 °C
­10 °C to +70 °C
±20 × 10^-6 Max.
70 mA Max.
40 % to 60 %
VCC-1.1 V Min.
VCC-1.5 V Max.
LV-PECL
70 % VCC Min.
30 % VCC Max.
1 ns Max.
10 ms Max. *1
This is included in frequency tolerance specification.
Remarks
Please contact us for inquiries regarding
the available frequencies.
Store as bare product after unpacking
No load condition
VCC-1.3 V
VIH or OPEN : Enable
VIL or GND : Disable
20 % to 80 % (VOH-VOL)
Time at minimum supply voltage to be 0 s
+25 °C, VCC=3.3 V, First year.
Operating temperature range
Frequency tolerance
A
±30 × 10^-6 Max.
B
±35 × 10^-6 Max.
C
±20 × 10^-6 Max.
D
±25 × 10^-6 Max.
Operating temperature range
-40 °C to +85 °C
-40 °C to +85 °C
-10 °C to +70 °C
-10 °C to +70 °C
Aging
10 years
20 years
10 years
20 years
External dimensions
7.0 ±0.2
#6
#5
#4
(Unit:mm)
Footprint (Recommended)
(Unit:mm)
E 156.250A
PCD 674A
#1
#2
#3
1.8
C=0.1 µF Min. #6
#5
#4
1.4 ±0.15
C0.5
Pin map
Pin
1
2
3
4
5
6
CONNECTION
OE
DNC
GND
OUT1(Positive)
OUT2(Negati ve)
V CC
2.54±0.15 2.54±0.15
Not e:
(1) Please do not connect DNC pin (2) to the other patterns on the board such as
Supply voltage or GND.
(2) OEpin = HIGH or “Open” : Specified frequency output.
OEpin = LOW : Output is high impedance, oscillation stop.
C
Resist
#1
#2
#3
5.08
http://www.epsontoyocom.co.jp