S1D13503F00A200 Datasheet, PDF (205/270 Pages) Epson Company – S1D13503 Graphics LCD Controller

Epson Research and Development
Vancouver Design Center
Page 3
13503PD.EXE POWER DOWN UTILITY
13503PD is an OEM utility program for setting power down modes in the S1D13503 LCD Display Controller that supports
the SOLLEX Super VGA Standard video BIOS extensions. It provides a simple method for setting power modes during
power consumption testing.
Program Requirements
Video Controller
Display Type
BIOS
DOS Program
DOS Version
Windows Program
Windows DOS Box
Windows DOS Full Screen
OS/2 DOS Full Screen
: S1D13503
: Up to 640x480 LCD
: Seiko Epson 13503BIOS version 1.xx or later
: Yes
: 3.0 or greater
: No
: Yes
: Yes
: Yes
Installation
Copy the file 13503pd.exe to a directory that is in the DOS path on your hard drive.
Usage
13503PD is run from the DOS command line as follows:
13503pd ModeNumber
Where: ModeNumber is a decimal number (0, 1, or 2) for the desired power down mode.
Example: typing the following command line activates power down mode 2:
13503pd 2 <ENTER>
Output from the program can be redirected to an external DOS device such as a terminal attached to the serial port such as
COM1 as shown below:
13503pd 2 > com1 <ENTER>
Striking any key will set mode state 0 (no power down).
13503PD.EXE Power Down Utility
Issue Date: 01/01/29
S1D13503
X18A-B-005-05