XG-1000CA Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – CRYSTAL LOW-JITTER SAW OSCILLATOR

Crystal oscillator
LOW-JITTER SAW OSCILLATOR (SPSO)
OUTPUT : CMOS
XG - 1000CA / CB
Output frequency range
Supply voltage
Frequency tolerance
Output
Function
External dimensions
: 50 MHz to 170 MHz
: 1.8 V / 2.5 V / 3.3 V
: 5010^-6, 10010^-6
: CMOS
: Output enable (OE)
: CA: 7.05.01.2 mm
CB: 5.03.21.1 mm
 Very low jitter and low phase noise by SAW unit.
Actual size
XG-1000CA
Product Number (please contact us)
XG-1000CA: Q3851CA00xxxx00
XG-1000CB: Q3851CB00xxxx00
XG-1000CB
Specifications (characteristics)
Item
Symbol
Specifications
Conditions / Remarks
50.000 MHz to 170.000 MHz
Output frequency range *1
f0
75.000 MHz, 98.304 MHz, 100.000 MHz,
106.250 MHz, 125.000 MHz, 150.000 MHz
Standard frequency
Supply voltage
VCC
E: 1.8 V 0.1V D: 2.5 V 0.125 V C: 3.3 V 0.3V
Storage temperature
T_stg
-40 C to +100 C
Storage as single product.
Operating temperature
T_use
-10C to +70C
Frequency tolerance *2
f_tol
B:50  10^-6 C:100  10^-6
Current consumption
Icc
20 mA Max.
25 mA Max.
35 mA Max. OE=VCC, No load condition
Disable current
I_dis
15 mA Max.
20 mA Max.
30 mA Max. OE=GND
Symmetry
SYM
40 % to 60 %
45 % to 55 %
40 % to 60 %
f0≤ 125 MHz
f0> 125 MHz
50 % VCC level, L_CMOS  Max.
Output voltage
VOH
VOL
VCC-0.35 V Min
0.35 V Max.
E:IOH = -6 mA / C,D:IOH = -8 mA
E:IOL = 6 mA / C,D:IOL = 8 mA
Output load condition (CMOS)
L_CMOS
15 pF Max.
Input voltage
VIH
VIL
70 % VCC Min.
30 % VCC Max.
OE terminal
Rise time / Fall time
tr / tf
2 ns Max.
Between 20% VCC and 80% VCC level, L_CMOS  Max
Start-up time
t_str
10 ms Max.
Time at minimum supply voltage to be 0 s
Jitter *3
tRMS
3 ps Typ.
 (RMS of total distribution)
tp-p
25 ps Typ.
Peak to Peak
Frequency aging
f_aging
5  10^-6 / year Max.
+25 C, First year, VCC=1.8 V, 2.5 V, 3.3 V
*1 Please contact us for requirements non-standard frequencies.
*2 This includes initial frequency tolerance, temperature variation, supply voltage variation and load variation.
*3 Tested using a DTS-2075 Digital timing system made by WAVECREST with jitter analysis software VISI6.
Product Name
(Standard form)
XG-1000 CA 150.000000MHz D B
①
②
③
④⑤
①Model ②Package type ③Frequency
④Supply voltage
⑤Frequency tolerance / Operating temperature
④Supply voltage
C 3.3 V Typ.
D 2.5 V Typ.
E 1.8 V Typ.
⑤Frequency tolerance
B ±50 × 10^-6 / -10 to +70°C
C ±100 × 10^-6 / -10 to +70°C
External dimensions
.
XG-1000CA
#4
#3
#3
1 .4
#4
(Unit:mm)ç ç ç Footprint (Recommended)
XG-1000CA
1.8
(Unit:mm)ç
E 125.000
XA4YAA
#1 _7.0±0.2 #2
#2
5.08
#1
5.0 8
XG-1000CB
#4
#3
E125.000
XB4YAA
#1 _5.0±0.2 #2
1.2
#3
#4
#2
#1
2.54
2.54
OE pin = HIGH : Specified frequency output.
OE pin = LOW : Output is high impedance
Pin map
Pin Connection
1
OE
2
GND
3
OUT
4
Vcc
#2 is connected to the
cover
5.08
XG-1000CB
1.4
2.54
To maintain stable operation, provide a 0.01uF to
0.1uF by-pass capacitor at a location as near as
possible to the power source terminal of the crystal
product (between Vcc - GND).