SG-210SED Datasheet, PDF (1/2 Pages) Epson Company – CRYSTAL OSCILLATOR (SPXO) OUTPUT : CMOS

Crystal oscillator
CRYSTAL OSCILLATOR (SPXO)
OUTPUT : CMOS
Low Jitter
SG - 210 S*D
Frequency range :
Supply voltage
:
Current consumption :
:
Function
:
External dimensions :
50.000 MHz to 80.000 MHz
1.8 V Typ. / 2.5 V Typ. / 3.3 VTyp.
7.0 mA Max.
(SDD: 2.5 V No load condition 80 MHz)
Standby( ST )
2.5 × 2.0 × 0.8 mm
Actual size
Product Number (please contact us)
X1G0029x1xxxx00
Specifications (characteristics)
Item
Output frequency range
Supply voltage
Storage temperature
Operating temperature
Symbol
f0
VCC
T_stg
T_use
Frequency tolerance
f_tol
Current consumption
ICC
Stand-by current
I_std
Symmetry
SYM
Output voltage
VOH
VOL
Output load condition (CMOS) L_CMOS
Input voltage
VIH
VIL
Specifications
SG-210SED
SG-210SDD
SG-210SCD
50.000 MHz to 80.000 MHz
1.8 V Typ.
2.5 V Typ.
3.3 V Typ.
1.6 V to 2.2 V
2.2 V to 3.0 V
2.7 V to 3.6 V
-40 C to +125 °C
-40 C to +85 °C
B: 50 × 10^-6, C: 100 × 10^-6
L: 50 × 10^-6, M: 100 × 10^-6
6.0 mA Max.
7.0 mA Max.
8.0 mA Max.
10.0 µA Max.
45 % to 55 %
VCC -0.4 V Min.
0.4 V Max.
30 pF Max.
70 % VCC Min.
30 % VCC Max.
Rise time / Fall time
tr/ tf
4 ns Max.
Start-up time
Frequency aging
Jitter *1
t_str
f_aging
tDJ
tRJ
tRMS
2 ms Max.
3 × 10^-6/ year Max..
10 × 10^-6/ 10 years Max.
0.1 ps Typ.
0.1 ps Typ.
3.2 ps Typ.
2.7 ps Typ.
30 ps Typ.
25 ps Typ.
Phase Jitter
tPJ
1.0 ps Max.
*1 Tested using a DTS-2075 Digital timing system made by WAVECREST with jitter analysis software VISI6.
Conditions / Remarks
Please contact us about available frequencies.
Storage as single product.
-20 C to +70 C
-40 C to +85 C
No load condition
ST =GND
50 % VCC level,L_CMOS  30 pF
IOH=-8 mA(SCD,SDD), -4 mA(SED)
IOL= 8 mA(SCD,SDD), 4 mA(SED)
ST terminal
20 % VCC to 80 % VCC level,
L_CMOS  30 pF
t=0 at 90 % VCC
+25 °C, First year, VCC= 1.8 V, 2.5 V, 3.3 V
+25 °C, 10 years, VCC= 1.8 V, 2.5 V, 3.3 V
Deterministic Jitter
Random Jitter
Peak to Peak
L_CMOS  15 pF
Offset frequency:
12 kHz to 20 MHz
Product Name
(Standard form)
SG-210 S E D 50.000000MHz L
① ②③
④
⑤
①Model ②Function (S:Standby) ③Supply voltage
④Frequency ⑤Frequency tolerance
③Supply voltage
E 1.8 V Typ.
D 2.5 V Typ.
C 3.3 V Typ.
⑤Frequency tolerance
B ±50 × 10^-6 / -20 to +70°C
C ±100 × 10^-6 / -20 to +70°C
L ±50 × 10^-6 / -40 to +85°C
M ±100 × 10^-6 / -40 to +85°C
External dimensions
(Unit:mm)ç ç ç Footprint (Recommended)
(Unit:mm)ç
2.50.15
#4
#3
50.00B
B631A
#3
#4
C
(ex. 0.01 µF)
Resist
#4
1.1 _#3
#1
#2
#2
0.9 0.8 ^#1
Pin map
Pin Connection
1
ST
2
GND
3
OUT
4
VCC
Note.
ST pin = HIGH or "open" : Specified frequency output.
ST pin = LOW : Output is high impedance, oscillation stops.
#1
#2
1.7
To maintain stable operation, provide a 0.01uF to
0.1uF by-pass capacitor at a location as near as
possible to the power source terminal of the crystal
product (between Vcc - GND).