|
S4E5B001B000A00 Datasheet, PDF (1/2 Pages) Epson Company – Monochrome EPD Controller Module | |||
|
EPD Module
S4E5B001B000A00
S4E5B001B000A00 Monochrome EPD Controller Module November 2012
EPSON's EPD Controller Module is a complete, high performance, easy to use solution for
E Ink EPDs (Electronic Paper Displays). The module includes all the necessary digital and analog power circuitry
for driving an E Ink panel. The module consists of Epsonâs S1D13522 EPD controller, an on-board 26MHz crystal
clock source, a 4 Mbit flash memory for command/waveform storage, and a power management IC (PMIC) with
built in temperature sensor.
The module was developed to remove the complexities of board design from our customers thus reducing time to
market and opening a variety of applications.
The S4E5B001B000A00 EPD Controller Module is the ideal choice for new EPD designs and design upgrades.
ï® Features
ï· Epson S1D13522 EPD Controller
ï· Picture-in-Picture and Cursor functions with
ï· Targeted for popular display resolutions from E Ink: separate buffers
800x600, 1024x768 and 1200x825
ï· No external clock source required
(www.eink.com)
ï· Four regulated output voltages for Source and
ï· Multi-Regional updates for smooth drawing
Gate Driver power supplies
ï· Rotation support for Host Writes
ï· VPOS + VNEG = ±50mV tracking accuracy
ï· Low Host overhead
ï· Controlled inrush current during soft start
ï· 8/16-bit Indirect or Serial Host Support
ï· Six General Purpose IO Pins available
ï· Automatic temperature compensation with onboard ï· Package: 76-pin 23mm x 23mm x 2.4mm
Thermal Sensor
Castellated-via, 1mm pitch
ï· Optional auto boot display support and
customizable boot screen
ï· Programmable Power Management
ï® System Diagram
HOST
S4E5B001B000A00
8/16-bit or
Serial Host
Driver Interface
VCOM, Source and
Gate Drivers
Power Supplies
E Ink Display
Module Supply
3.3V
GPIO
PMIC Inverting
Regulator Supply
ï
ï
2.7V ~ 5.5V
X93A-C-002-01
Revision 1.1
1
|
▷ |