S4E39860 Datasheet, PDF (1/2 Pages) Epson Company – GPS Receiver Module

Preliminary
S4E39860
GPS Receiver Module
Ultra Low-Power consumption (100mW)
Compact and Thin design
Handles differential GPS
OVERVIEW
GPS (Global Positioning System) having been used Car Navigation Systems, is now going to be used in
mobile equipment as well. S4E39860 is the miniature GPS Receiver module developed for the purpose of built
in the mobile equipment based on the battery-drive. Super-low consumption electric power, compact and thin
size were realized by developing the special IC which built in Signal Processor, SRAM and RTC in the 32Bit
RISC- CPU (SEIKO EPSON original).
FEATURES
GPS Receive Part Specification
Receiving frequency
Receiving method
Sensitivity
Update rate
Accuracy
Measurement time
(90% probability)
Interruption recovery time
Dynamic capability
Measurement method
Geodetic system
Electric Specification
Power supply voltage
Backup voltage
Power consumption
At power saving
Temperature range
Operating temperature range
Storage temperature range
Interface Specification
Data output format
Transfer rate
I/O connector
RF connector
Dimensions
1575.42MHz (L1),C/A code
Multi-Cannels (8 channels)
-130dBm
1 second (shortest)
Position:25m CEP (SA OFF), Velocity:0.1m/s (SA OFF)
Cold start
:5 minutes or less
Warm start
:50 seconds or less
Hot start
:10 seconds or less
2 seconds or less (90%)
Velocity:350m/sec (max.), Acceleration:4G
Corresponding to 2D/3D and Auto Measurement method
WGS84
3.1V 3.6V (Typ 3.3V)
2.3V VCC
100mW (at 3.3V operation)
10 A (+25 )
-30 +80
-40 +85
NMEA0183 (standard) or EPSON format
Serial interface, 9600bps
DF14-6P-1.25H (HIROSE ELECTRIC)
U.FL (HIROSE ELECTRIC)
34.8 24.8 6.0 (W D Hmm)
*Notes: Since the specification above are based on the under-developing product, they may be changed
before actual manufacturing.
SEIKO EPSON CORPORATION