S1V30080 Datasheet, PDF (1/2 Pages) Epson Company – Melody/Buzzer/Tone sound synthesizer function

S1V30080
„ Outline
♪Melody Synthesizer♪ function included Voice Guidance LSI
S1V30080 supports multi-channel Speech/Sound playback from integrated ROM, Moreover Melody Synthesizer function is
supported which is suitable for music effect and buzzer sound by tiny data with Speech/Sound playback. Speech/Sound playback and
melody synthesizer function works individually and can be mixed, of course the volume can be set individually.
The voice data creation tool for EPSON voice guidance LSI allows easy creation of high-quality voice data from text data without
studio recording.
S1V30080 is controlled over the serial interface allowing control from a wide range of hosts easily from the host and also S1V30080
supports standalone mode which enable to control without CPU or without host S/W on CPU.
S1V30080 makes it possible to realize time-to-market for the products featuring Voice Guidance.
„ Features
z Melody/Buzzer/Tone sound synthesizer function
- 5-ch Melody Sound can be created just by music note information(5 octave supported)
- Buzzer/Tone Sound can be generated just by specifying the frequency(5ch supported)
z Speech/Sound Playback
- Individual 2ch Voice ROM data can be played.(EPSON original format)
- Sampling Frequency : 4, 8, 12 and 16 kHz
z Sequencer function (to set delay between phrases)
- A maximum of 127 files can be sequenced with one configuration message (no constraints on phrase combinations)
- Delay setting can be set between phrases: 0-1000ms (10ms step)
z Mixing Function
- Synthesizer Sound and Speech/Sound Playback from ROM can be mixed(individual volume setting possible)
z Speech/Sound ROM
- fs:8kHz approx 30 sec, fs:16kHz approx 15sec
z Host Interface
- Synchronous serial interface (SPI, I2C) … [Command Control base]
z Standalone mode
- By just specifying the ruled number, the sound can be played from ROM and Melody Synthesizer.
z DA Converter integrated
z Clock(Crystal oscillation, Ceramic oscillation, Clock input
- fs:8kHz 8.192MHz, fs:16kHz 16.384MHz
z Power Supply voltage
- 2.2-5.5V Single Power Supply
z Product Configuration
Product code
System clock source
External Serial Flash
Memory
Package
S1V30080M00**00
External clock
-
SSOP2-16(4.4mm x 6.6mm, 0.8mm pin pitch）
S1V30080M01**00
crystal unit
-
SSOP2-16(4.4mm x 6.6mm, 0.8mm pin pitch）
S1V30080F00**00
External clock
support
QFP12-48 (7mm x 7mm, 0.5mm pin pitch)
S1V30080F10**00
External clock
support
QFP13-52 (10mm x 10mm, 0.65mm pin pitch)
S1V30080F11**00
crystal unit
-
QFP13-52 (10mm x 10mm, 0.65mm pin pitch)
SEIKO EPSON CORPORATION