S1D13L03 Datasheet, PDF (1/2 Pages) Epson Company – S1D13L03 WVGA Graphics Controller

S1D13L03
S1D13L03 WVGA Graphics Controller
The S1D13L03 is a color LCD graphics controller with an embedded 768K byte display buffer.
The S1D13L03 supports a 8/16-bit Intel 80 CPU architecture while providing high performance bandwidth
into display memory allowing for fast screen updates. Resolutions supported include 800x480 single
buffered and 352x416 double buffered.
The S1D13L03 uses a double-buffer architecture to prevent any visual tearing during streaming video
screen updates.
 FEATURES
• Embedded 768K byte SRAM Display Buffer
• Low Operating Voltage
• 8/16-bit Intel 80 interface (used for display or register
data).
• RGB: 8:8:8, 6:6:6, 5:6:5 (8:8:8 will be truncated to 16 or
18 bpp).
• Active Matrix TFT interface - 18-bit interface.
• Supports resolutions up to 800x480.
• Hardware / Software Power Save mode.
• 16/18 bit-per-pixel (bpp) color depths.
• Double-Buffer available to prevent image tearing during
streaming input
• Internal programmable PLL.
• Single MHz clock input: CLKI.
• General Purpose Input/Output pins.
 SYSTEM BLOCK DIAGRAM
HOST
CPU
Control Signals
S1D13L03
TFT(RGB digital)
S1D13L03 Features
768kB SRAM
Gamma LUT
18-bit TFT interface