S1C88816 Datasheet, PDF (1/20 Pages) Epson Company – 8-bit Single Chip Microcomputer

PF1157-02
S1C88816
8-bit Single Chip Microcomputer
LOoPwpreoVrdaoutlictoatnsge
s DESCRIPTION
q Original Architecture Core CPU
q Large Capacity ROM (116K bytes)
q Low Current Consumption
q Wide-range Operating Voltage (1.8V to 5.5V)
q Built-in Melody Generator and A/D Converter
The S1C88816 microcomputer features the S1C88 (MODEL 3) CMOS 8-bit core CPU along with a 116K bytes
of ROM, an 8K bytes of RAM, three different timers, a serial interface with optional asynchronization or clock
synchronization, a melody generator and an A/D converter. The S1C88816 has large capacity of ROM and
RAM and fully operable over a wide range of voltages. Furthermore, it can perform high speed operations even
at low voltage. Like all the equipment in the S1C Family, these microcomputers have low power consumption.
s FEATURES
q Core CPU ................................... S1C88 (MODEL3) CMOS 8-bit core CPU
q OSC1 Oscillation circuit ............. Crystal oscillation circuit/CR oscillation circuit/external clock input 32.768
kHz (Typ.)
q OSC3 Oscillation circuit ............. Crystal oscillation circuit/ceramic oscillation circuit/CR oscillation circuit/
external clock input 8.2 MHz (Max.)
q Instruction set ............................. 608 types (usable for multiplication and division instructions)
q Min. instruction execution time .. 0.244 µsec/8.2 MHz (2 clock)
q Internal ROM capacity ............... 116K bytes
q Internal RAM capacity ................ 8K bytes/RAM, 4224 bits/display memory, 512 bytes/melody RAM
q Input port .................................... 9 bits (1 bit can be set for event counter external clock input)
q Output port ................................. 7 bits (can be set for BZ, BZ, TOUT, TOUT and FOUT output)
q I/O port ....................................... 16 bits (P10–P13 and P14–P17 can be set for serial I/F input/output and
A/D converter input, respectively)
q Serial interface ........................... 1ch (Optional clock synchronous system or asynchronous system)
q Timer .......................................... Programmable timer (8 bits): 2ch
(1ch can be set as a an event counter or 2ch as a 16 bits programmable
timer for 1ch)
Clock timer (8 bits):
1ch
Stopwatch timer (8 bits): 1ch
q Power supply circuit to drive liquid crystals .. Built-in (booster type, 5 potentials/4 potentials)
q LCD driver .................................. Dot matrix type (compatible with 5 × 8 or 5 × 5 fonts)
72 segments × 32 common (1/5 bias)
88 segments × 16 common (1/5 bias or 1/4 bias)
88 segments × 8 common (1/5 bias or 1/4 bias)
q Sound generator ........................ Envelope function, equipped with volume control
q Watchdog timer .......................... Built-in
q Supply voltage detection (SVD) circuit .. Can detect up to 16 different voltage levels
q Melody generator ....................... 1 sound source (scale: 3 octaves, note: 8 types, tempo: 16 types)
Note and scale data are stored into the melody RAM (allows the CPU to
read and write)
q A/D converter ............................. Successive-approximation type, resolution: 10 bits, input: 4ch (shared
with P14–P17)
1