S1C6F016 Datasheet, PDF (1/2 Pages) Epson Company – CMOS 4-bit Single Chip Microcontroller

S1C6F016
CMOS
4-bit Single Chip Microcontroller
z High Performance 4-bit Core CPU S1C63000
z Flash EEPROM 16K x 13bit / 4K x bit
z Segment LCD Driver (Max:56SEG x 8COM)
z R/F Converter to Measure Temperature and Humidity
z Low Current Consumption
z Low Voltage Operation
■ DESCRIPTIONS
The S1C6F016 is a microcontroller features low voltage operations and low current consumption. It consists of a 4-bit core
CPU S1C63000 as the core CPU, Flash EEPROM (16K words x 13 bits), RAM (2K words x 4 bits), supply voltage detection
(SVD) circuit, serial interface, timers, sound generator, and integer multiplier. It also incorporates a segment LCD
controller/driver that can drive a maximum 56-segment x 8-common LCD panel, and an R/F converter that can measure
temperature and humidity using sensors such as a thermistor.
The S1C6F016 is suitable for battery driven clocks and watches with temperature and humidity measurement functions.
„ FEATURES
z CPU
z OSC1 oscillation circuit
z OSC3 oscillation circuit
4-bit CMOS core CPU S1C63000
32.768kHz (Typ.) crystal oscillation circuit
4.2MHz (Max.) ceramic oscillation circuit
1.8MHz (Typ.) CR oscillation circuit (extenal R), or
z Instruction set
500kHz (Typ.) CR oscillation circuit (built-in R) (*1)
47 types of basic instructions (411 instructions with all),
z Instruction execution time
8 types of addressing modes
During operation at 32.768kHz: 61µsec 122µsec 183µsec
z Flash EEPROM capacity
During operation at 4MHz: 0.5µsec
Code ROM: 16,384 words x 13 bits
1µsec 1.3µsec
z RAM capacity
Data ROM: 4,096 words x 4 bits
Data memory: 2,048 words x 4 bits
z LCD driver
z I/O ports
z Serial interface
z Time base counters
Display memory: 448 bits
56 segments (Max., *1) x 3 to 8 commons (*2)
24 bits
1 port (8-bit clock synchronous system with SPI supported)
Clock timer
z Programmable timer
1/1000-second stopwatch timer with direct key input function
16-bit timer x 2 channels
z Watchdog timer
z Sound generator
z R/F converter
Each 16-bit timer is configurable to two 8-bit timer channels (*2)
Built-in
With envelope and 1-shot output functions
2 channels, CR oscillation type R/F converter with 20-bit counters,
z Integer Multiplier
supports resistive humidity sensors
8-bit accumulator x 1 channel
Multiplication: 8 bits x 8 bits → 16-bit product
Division: 16 bits ÷ 8 bits → 8-bit quotient and 8-bit remainder
z Supply voltage detection (SVD) circuit
z External interrupt
z Internal interrupt
Programmable 16 detection voltage levels (*2)
Key input
8 systems
Watchdog timer (NMI)
1 systems
Clock timer
8 systems
Stopwatch timer
4 systems
Programmable timer
8 systems
Serial interface
1 systems
z Power supply voltage
z Operation temperature range
z Current consumption (Typ.)
R/F converter
3 systems
1.8 to 3.6V (for normal operation), 2.7 to 3.6V (for Flash programming) (*1)
-20 to 70°C
During SLEEP (32kHz)
0.7µA
During HALT (32kHz)
2µA
During running (32kHz)
9µA
z Shipment form
During running (4MHz)
QFP15-100pin or die form
950µA
*1: Can be selected with mask option. *2: Can be selected with software.