S1C60N05 Datasheet, PDF (1/12 Pages) Epson Company – 4-bit Single Chip Microcomputer

PF912-04
Micro MINI S1C60N05
4-bit Single Chip Microcomputer
LOoPwpreoVrdaoutlictoatnsge
q S1C6200B Core CPU
q Low Voltage and Low Power
q Built-in LCD Driver
q Built-in A/D Converter (2ch.)
s INTRODUCTION
Each member of the S1C60N05 Series of single chip microcomputers feature a 4-bit S1C6200B core CPU,
1,536 words of ROM (12 bits per word), 80 words of RAM (4 bits per word), an LCD driver, 4 bits for input ports
(K00–K03), 4 bits for output ports (R00–R03), one 4-bit I/O port (P00–P03), clock timer and A/D converter.
Because of their low voltage operation and low power consumption, the S1C60N05 Series are ideal for a wide
range of applications.
s CONFIGURATION
The S1C60N05 Series are configured as follows, depending on the supply voltage.
Model
S1C60N05
Supply voltage
1.8–3.5 V
Oscillation circuits
Crystal or CR
S1C60L05
1.2–2.0 V
Crystal or CR
s FEATURES
q Core CPU ................................................... S1C6200B
q Built-in oscillation circuit............................. Crystal or CR oscillation circuit, 32,768 Hz (typ.)
q nstruction set .............................................. 100 instructions
q ROM capacity ............................................ 1,536 words × 12 bits
q RAM capacity (data RAM) ......................... 80 words × 4 bits
q Input port .................................................... 4 bits (Supplementary pull-down resistors may be used)
q Output port ................................................. 4 bits (Piezo buzzer and programmable frequency output can
be driven directry by mask option)
q Input/output port ......................................... 4 bits
q LCD driver .................................................. 20 segments × 4 common duty (or 3 and 2 common duty)
q Timer .......................................................... Clock timer
q A/D converter ............................................. CR oscillation type A/D converter built-in (2 channels)
q Interrupts:
External interrupt ................................ Input port interrupt 1 system
Internal interrupt ................................. Timer interrupt
1 system
A/D converter interrupt 1 system
q Supply voltage ........................................... 1.5 V (1.2–2.0 V) S1C60L05 (During A/D conversion)
3.0 V (1.8–3.5 V) S1C60N05
q Current consumption (typ.) ........................ 0.8 µA (Crystal oscillation CLK = 32,768 Hz, when halted)
1.5 µA (Crystal oscillation CLK = 32,768 Hz, when executing)
q Supply form ................................................ QFP6-60pin (plastic) or chip
1