S1C33T01 Datasheet, PDF (1/2 Pages) Epson Company – 32-bit Single Chip Microcontroller

S1C33T01
32-bit Single Chip Microcontroller
● High-speed 32-bit RISC Core
● Multiply Accumulation
● 8K-byte RAM Built-in
● 10-bit ADC
● 4-ch. SIO, 2-ch. I²C
● High-speed DMA, Intelligent DMA
„ DESCRIPTIONS
The S1C33T01 is a CMOS 32-bit microcomputer composed of a CMOS 32-bit RISC core, 8K-byte RAM, DMA, 4-ch. SIO,
2-ch. I2C, ADC, timers, PLL and oscillators. The S1C33T01 features high-speed operation and low current consumption. The
S1C33T01 also provides a DSP function using the internal MAC (multiplication and accumulation) operation function with the
A/D converter, this makes it possible to achieve speech recognition and voice synthesis systems.
„ FEATURES
●CMOS LSI 32-bit parallel processing
●Main clock
●Sub clock
●Instruction set
●Internal RAM size
●Clock timer
●Programmable timer
●PWM timer
●Watchdog timer
●Serial interface
●I²C bus
●10-bit A/D converter
●High-speed DMA
●Intelligent DMA
●I/O port
●Interrupt controller
●External bus interface
●Shipping form
●Supply voltage
●Current consumption
S1C33000 RISC core
60MHz (Max., up to 15MHz external clock input)
32.768kHz (Typ., crystal)
16-bit fixed length, 105 instructions
(MAC instruction is included, 2 cycles)
8,192 bytes
1 channel
8 bits × 6 channels and 16 bits × 10 channels
Realized with a 16-bit programmable timer
Realized with a 16-bit programmable timer
4 channels
Clock synchronization type and asynchronization type are selectable.
Usable as an infrared ray (IrDA) interface.
Single master type, 2 channels (option)
Successive approximation type, 8 input channels
4 channels
128 channels
Input port : 13 bits
I/O port : 69 bits
External interrupts : 18 types
Internal interrupts: 69 types
24-bit address bus, 16-bit data bus, 7 chip enable pins
DRAM and burst ROM may be connected directly.
QFP21-176pin
Core voltage : 1.8 to 3.6V
I/O voltage : 1.8 to 5.5V
SLEEP state : 10μA (3.3V, 32.768kHz, clock timer run state, Typ.)
: 2.5μA (2.0V, 32.768kHz, clock timer run state, Typ.)
RUN state : 65mA (3.3V, 50MHz Typ.)