S1C33L26 Datasheet, PDF (1/7 Pages) Epson Company – CMOS 32-bit Application Specific Controller

S1C33L26
CMOS 32-bit Application Specific Controller
●32-bit RISC CPU core (Epson S1C33 PE core) (Max. 60 MHz operation)
●34KB RAM (including cache and VRAM)
●Programmable operating clock using PLL
(Division ratio: 1/1～1/10, Multiplication ratio: x1～x16)
●DSP function (Multiplier/ Divider)
●1KB Instruction Cache and 1KB Data Cache
●Graphics Engine (GE)
Drawing objects, Image data block transfer, Drawing effects
Word boundary commands (variable length) are provided for drawing
control and commands list.
●LCD controller
Supports 1/2/4/8/12/16 and 24 bpp (16M-color) TFT color panel
Supports 1/2/4/8/12 bpp CSTN,1/2/4 bpp mono-STN panel
IVRAM (QVGA: 320 x 240 2bpp)
Supports up to 16M-color LCD controller with external SDRAM/SRAM as
VRAM.
Two-image overlay display via the Picture-in-Picture Plus function
Brightness/gray scale control via the mono display LUT (Look Up Table
with 16 × 4 bits), or palette control via the color display LUT (Look Up
Table RAM with 256 × 16 bits)
●8-ch. DMA controller
●Burst control SDRAM controller
●1-ch. x 16-bit audio PWM timer
●2-ch. x 16-bit PWM timer, 8-ch. x 8-bit timer
●1-ch. Universal Serial I/F (UART/SPI/I2C)
●1-ch. Universal Serial I/F with Serial or Parallel LCD interface
●2-ch. SIO with FIFO
●I²S bus interface (16-bit format)
●Remote Controller Circuit (REMC)
●6-ch. 10-bit ADC for analog input
●USB－FS(12Mbps) function controller (FIFO 1KB)
●RTC and 16-Byte battery backup RAM with separated RTCVDD
■ DESCRIPTIONS
The S1C33L26 is a 32-bit application specific RISC controller that features extensive peripheral circuits such as an
enhanced drawing graphics module, GPIO ports, serial interface modules, a USB module, PWM generators, and an A/D
converter. It is suitable for applications that require a high-resolution LCD display, e.g. control panels on OA/FA equipment
and intelligent remote controllers.
The S1C33L26 incorporates an LCD controller and VRAM supporting four-level gray scale QVGA display in single-chip.
Adding an external SDRAM expands this capability into a higher resolution and with more displayable colors (e.g., 64K-color
VGA display). An LCD driver interface with DMA function is also implemented allowing efficient data transfer to LCD modules
that include a built-in VRAM LCD driver. In addition, the embedded Graphics Engine (GE) provides rich graphic features,
such as drawing functions for dots, straight lines, triangles, rectangles, and circles, resizing, and rotation that can be used
simply by calling commands.
The GE also supports drawing of lossless compressed image data; this makes it possible to reduce CPU load and image
data ROM size.
As for DSP functions, a 32-bit × 32-bit multiplier (MUL) and a 16-bit ÷ 16-bit divider (DIV) are implemented. These functions
help reduce CPU load for ADPCM audio data playback processing. Also the embedded I2S interface module is used to
connect an external audio DAC.
The S1C33L26 has adopted the EPSON SoC (System on Chip) design technology using 0.18 μm low power CMOS process
to install these features.