|
S1C33L01 Datasheet, PDF (1/2 Pages) Epson Company – 32-bit Single Chip Microcontroller | |||
|
S1C33L01
32-bit Single Chip Microcontroller
â High-speed 32-bit RISC Core
â Multiply Accumulation
â Built-in LCD Controller
â 10-bit ADC
â Built-in ROM and RAM
â Twin-clock Oscillator
 DESCRIPTIONS
The S1C33L01 is a CMOS 32-bit microcontroller composed of a CMOS 32-bit RISC core, ROM, RAM, DMA, timers, SIO,
PLL, LCDC and other circuits. The S1C33L01 can be operated with high speed and spend little current. With the ADC, PWM
and the MAC function, the S1C33L01 is suitable for voice applications and PDAs.
 FEATURES
âCMOS LSI 32-bit parallel processing
âMain clock
âSub clock
âInstruction set
âInternal ROM size
âInternal RAM size
âLCD controller
âClock timer
âProgrammable timer
âPWM timer
âWatchdog timer
âSerial interface
â10-bit A/D converter
âHigh-speed DMA
âIntelligent DMA
âI/O port
âInterrupt controller
âExternal bus interface
âShipping form
âSupply voltage
âCurrent consumption
S1C33000 RISC core
50MHz (Max., up to 12.5MHz external clock input)
32.768kHz (Typ., crystal)
16-bit fixed length, 105 instructions
(MAC instruction is included, 2 cycles)
128K bytes
Data RAM : 8K bytes
VRAM : 40K bytes
4/8-bit monochrome/color LCD interface
Active-matrix TFT/D-TFD interface
1, 2 or 4 bits/pixel; 2, 4, or 16-level gray-scale display
1, 2, 4 or 8 bits/pixel; 2, 4, 16 or 256 color display
1 channel
8 bits à 4 channels and 16 bits à 6 channels
Realized with a 16-bit programmable timer
Realized with a 16-bit programmable timer
2 channels
Clock synchronization type and asynchronization type are selectable.
Usable as an infrared ray (IrDA) interface.
Successive approximation type, 8 input channels
4 channels
128 channels
Input port : 13 bits
I/O port : 29 bits
Pins are shared with the inputs and outputs of built-in peripheral circuits.
External interrupts : 6 types
Internal interrupts : 29 types
24-bit address bus, 16-bit data bus, 7 chip enable pins
DRAM and burst ROM may be connected directly.
QFP21-176pin or chip
Core voltage : 1.8 to 3.6V
I/O voltage : 1.8 to 5.5V
SLEEP state : 10μA (3.3V, 32.768kHz, clock timer run state, Typ.)
: 2.5μA (2.0V, 32.768kHz, clock timer run state, Typ.)
RUN state : 60mA (3.3V, 50MHz Typ.)
|
▷ |