English
Language : 

S1C33221 Datasheet, PDF (1/2 Pages) Epson Company – 32-bit Single Chip Microcontroller
S1C33221/222
32-bit Single Chip Microcontroller
● High-speed 32-bit RISC Core
● Multiply Accumulation
● 10-bit ADC
● Built-in RAM
● High-speed DMA, Intelligent DMA
● Twin-clock Oscillator
„ DESCRIPTIONS
The S1C33221/222 is a CMOS 32-bit microcomputer composed of a CMOS 32-bit RISC core, ROM, RAM, DMA, timers,
SIO, PLL and other circuits. The S1C33221/222 can be operated with high speed and spend little current. With the ADC,
PWM and the MAC function, the S1C33221/222 is suitable for voice applications, PDAs and OA products such as printers.
„ FEATURES
●CMOS LSI 32-bit parallel processing
●Main clock
●Sub clock
●Instruction set
●Internal RAM size
●Internal ROM size
●Clock timer
●Programmable timer
●PWM timer
●Watchdog timer
●Serial interface
●10-bit A/D converter
●High-speed DMA
●Intelligent DMA
●I/O port
●Interrupt controller
●External bus interface
●Shipping form
●Supply voltage
●Current consumption
S1C33000 RISC core
50MHz (Max., up to 12.5MHz external clock input)
32.768kHz (Typ., crystal)
16-bit fixed length, 105 instructions
(MAC instruction is included, 2 cycles)
8,192 bytes
131,072 bytes (S1C33221), 65,536 bytes (S1C33222)
1 channel
8 bits × 6 channels and 16 bits × 6 channels
Realized with a 16-bit programmable timer
Realized with a 16-bit programmable timer
4 channels
Clock synchronization type and asynchronization type are selectable.
Usable as an infrared ray (IrDA) interface.
Successive approximation type, 8 input channels
4 channels
128 channels
Input port : 13 bits
I/O port : 29 bits
Pins are shared with the inputs and outputs of built-in peripheral circuits.
External interrupts : 10 types
Internal interrupts: 29 types
24-bit address bus, 16-bit data bus, 7 chip enable pins
DRAM and burst ROM may be connected directly.
QFP15-128pin
Core voltage : 1.8 to 3.6V
I/O voltage: 1.8 to 5.5V
SLEEP state : 10μA (3.3V, 32.768kHz, clock timer run state, Typ.)
: 2.5μA (2.0V, 32.768kHz, clock timer run state, Typ.)
RUN state : 70mA (3.3V, 50MHz Typ.)