S1C17611 Datasheet, PDF (1/3 Pages) Epson Company – 16-bit Single Chip Microcontroller

S1C17611
16-bit Single Chip Microcontroller
● Low Power MCU(operating voltage 1.8V, 0.75uA/SLEEP, 2.5μA/HALT)
● Flash memory(32KByte), 8.2MHz high speed operating at 1.8V power voltage
● LCD driver: max 12 segment, 8seg x 8com or 12seg x 4com
● Analog I/F: Ａ/D converter(INL/DNL Max. 1.5LSB), R/F converter
● RISC CPU core S1C17: the compact code optimized for C, and high
throughput of an instruction / clock, supports serial ICE
■ DESCRIPTIONS
The S1C17611 is a 16-bit MCU featuring high-speed low-power operations, compact dimensions, wide address
space and on-chip ICE. A/D converter and R/F converter are built in and sensor of various analog I/F can be
connected. It is suitable for the application of health care product, sports watch and meter module etc. with
sensor that is required a small size and micro display in the battery driven.
„ FEATURES
●CPU
●IOSC oscillator circuit
●OSC3 oscillator circuit
●OSC1 oscillator circuit
●Internal Flash memory
●Internal RAM
●Internal Display RAM
●A/D Converter
●R/F Converter
●Input/output port
●Serial interface
●Timer
●LCD driver
●Power supply voltage detection (SVD) circuit
●Interrupt
●Power supply voltage
●Operating temperatures
●Current consumption
Epson original 16-bit RISC CPU core S1C17
Multiplier/divider (COPRO)
- 16 bit x 16 bit multiplier/16 bit ÷ 16 bit divider
- 16 bit x 16 bit + 32 bit product-sum operation
2.7 MHz (typ.)
Oscillating start up 5 μs (max.)
Boot Clock (External components not required.)
Crystal oscillator circuit or ceramic oscillator circuit, 8.2 MHz (max.)
or external clock input
Crystal oscillator circuit 32.768 kHz (typ.)
32 Kbytes (for both instructions and data)
Allows 1,000 rewrites (min.)
Read/write protection function
Allows onboard rewriting with the ICD Mini (S5U1C17001H) debug
tool and self-rewriting via software.
2 Kbytes
12 bytes
10 bit resolution 4ch
DC oscillation/AC oscillation/External input 1ch.
Max. 19-bit general purpose input/output
(shared with peripheral circuit input/output pins)
SPI (master/slave) 1ch.
I2C (master) 1ch.
I2C (slave) 1ch.
UART (460,800 bps, IrDA1.0 compatible) 1ch.
8-bit timer (T8F) 1ch.
16-bit timer (T16) 3ch.
PWM timer (T16E) 2ch.
Clock timer (CT) 1ch.
Stopwatch timer (SWT) 1ch.
Watchdog timer (WDT) 1ch.
8-bit OSC1 PWM timer (T8OSC1) 1ch.
8 SEG x 8 COM or 12 SEG x 4 COM (1/3 bias)
Internal booster power supply circuit (16-value programmable ontrast)
15-value programmable (1.8 V to 3.2 V)
NMI, P Port Input interrupt 3ch.
Serial Interface interrupt 4ch.
Timer interrupt 9ch.
LCD, SVD, ADC, RFC interrupt
1.8 V to 3.6 V (for normal operations)
2.7 V to 3.6 V (for flash deletion/programing)
Including voltage regulator circuit (with binary programmable
operating voltage)
-25°C to 70°C
SLEEP mode: 0.6 μA typ. (OSC1=OFF, IOSC=OFF, OSC3=OFF)