|
S1C17601 Datasheet, PDF (1/3 Pages) Epson Company – Low Power 16-bit Single Chip Microcontroller | |||
|
S1C17601
Low Power 16-bit Single Chip Microcontroller
â Low Power MCU (operating voltage 1.8 V, 0.6 μA/SLEEP, 2.0 μA/HALT)
â Flash memory(32KByte), 8.2MHz high speed operating at 1.8V power voltage
â LCD driver: max 128 segment, 16seg x 8com or 20seg x 4com
â Analog I/F: A/D converter(INL/DNL Max. 1.5LSB), R/F converter
â S1C17 High Performance 16-bit RISC CPU Core with C Optimized
Compact Code and Serial ICE Support
 DESCRIPTIONS
The S1C17601 is a 16-bit MCU featuring high-speed low-power operations, compact dimensions, wide address space and
on-chip ICE. A/D converter and R/F converter are built in and sensor of various analog I/F can be connected. It is suitable for
the application of health care product, sports watch and meter module etc. with sensor that is required a small size and micro
display in the battery driven.
 FEATURES
â CPU
âIOSC oscillator circuit
âOSC3 oscillator circuit
âOSC1 oscillator circuit
âInternal flash memory
âInternal RAM
âInternal Display RAM
âA/D Converter
âR/F Converter
âInput/output port
âSerial interfaces
â Timers
âLCD Driver
âSupply voltage detector
â Interrupts
âPower supply voltage
âOperating temperature
âPower consumption
Epson original 16-bit RISC CPU core S1C17
16 bit x 16 bit + 32 bit product-sum operation, 16 bit ÷ 16 bit division arithmetic unit
2.7 MHz (typ.)
Oscillating start up 5 μs (max.)
Boot Clock (External components not required.)
Crystal oscillator circuit or ceramic oscillator circuit, 8.2 MHz (max.) or external clock input
Crystal oscillator circuit 32.768 kHz (typ.)
32 Kbytes (for both instructions and data)
Allows 1,000 rewrites (min.)
Read/write protection function
Allows onboard rewriting with the ICD Mini (S5U1C17702H) debug tool and self-rewriting
via software.
2 Kbytes
20 bytes
10 bit resolution 4ch
DC oscillation/AC oscillation/External input 1ch.
Max. 24-bit general purpose input/output (shared with peripheral circuit input/output pins)
SPI (master/slave)
1ch
I2C (master)
1ch
I2C (slave)
1ch
UART (460,800 bps, IrDA1.0 compatible)
1ch
8-bit timer (T8F)
1ch
16-bit timer (T16)
3ch
PWM timer (T16E)
1ch
8-bit OSC1 timer (T8OSC1)
1ch
Clock timer (CT)
1ch
Stopwatch timer (SWT)
1ch
Watchdog timer (WDT)
1ch
16 SEG x 8 COM or 20 SEG x 4 COM (1/3 bias)
Internal booster power supply circuit (16-value programmable contrast)
15-value programmable (1.8 V to 3.2 V)
NMI, P Port Input interrupt
3ch.
Serial Interface interrupt
4ch.
Timer interrupt
9ch.
LCD, SVD, ADC, RFC interrupt
1.8 V to 3.6 V (for normal operations)
2.7 V to 3.6 V (for flash deletion/programing)
Including voltage regulator circuit (with binary programmable operating voltage)
-25°C to 70°C
SLEEP mode:
0.6 μA typ. (OSC1=OFF, IOSC=OFF, OSC3=OFF)
SEIKO EPSON CORPORATION
|
▷ |