English
Language : 

S1C17554 Datasheet, PDF (1/4 Pages) Epson Company – 16-bit Single Chip Microcontroller
S1C17554/564
16-bit Single Chip Microcontroller
●48-pin wafer-chip-scale package (WCSP)
●10-bit A/D converter
●Code-efficient architecture optimized for the C language, single-cycle
instruction high processing performance, serial ICE, and built-in 16-bit
RISC PCU core S1C17
■ DESCRIPTIONS
The S1C17554/564 is a compact 16-bit MCU that delivers high-speed, low power operation with large address space and
on-chip ICE. It integrates A/D converter and thus various analog-interface sensors are connectable. The ultra small
power-saving 48-pin WCSP is most suitable for sensor-applied products that require low power consumption and high-speed
processing.
„ FEATURES
The main features of the S1C17554/564 are listed below.
Model
S1C17554
S1C17564
CPU
CPU core
Seiko Epson original 16-bit RISC CPU core S1C17
Multiplier/Divider (COPRO)
• 16-bit × 16-bit multiplier
• 16-bit × 16-bit + 32-bit multiply and accumulation unit
• 16-bit ÷ 16-bit divider
Embedded Flash memory
Capacity
128K bytes (for both instructions and data)
Erase/program count
Min. 1 time
Other
• Read/program protection function
• An erasing/programming power supply (VPP) is required.
• Allows on-board programming using a debugging tool such as ICDmini.
Embedded RAM
Capacity
16K bytes
Clock generator
System clock source
2 sources (OSC3/OSC1)
3 sources (IOSC/OSC3/OSC1)
IOSC oscillator circuit
2/4/8/12 MHz(typ.) internal
oscillator circuit
OSC3 oscillator circuit
24 MHz (max.) crystal or ceramic oscillator circuit
Supports an external clock input.
OSC1 oscillator circuit
32.768 kHz (typ.) crystal oscillator circuit
Supports an external clock input.
Other
• Core clock frequency control
• Peripheral module clock supply control
I/O ports
Number of general-purpose I/O Max. 40 bits (TQFP13-64pin Max. 40 bits
ports
package)
(Pins are shared with the
Max. 34 bits (WCSP-48 package) peripheral I/O.)
(Pins are shared with the
peripheral I/O.)
Serial interfaces
SPI
I2C master (I2CM)
I2C slave (I2CS)
3 channels
1 channel
1 channel
UART
2 channels (IrDA1.0 supported)
IR remote controller (REMC)
1 channel
Universal serial interface (USI)
2 channels (Usable as a UART,
SPI, or I2C)
Timers
16-bit timer (T16)
3 channels
Fine mode 16-bit timer (T16F)
2 channels
16-bit PWM timer (T16A)
4 channels
Clock timer (CT)
1 channel
Stopwatch timer (SWT)
1 channel
1
Seiko Epson Corporation