S1C17001 Datasheet, PDF (1/6 Pages) Epson Company – CMS 16-bit Single chip Microcontroller

S1C17001
CMOS 16-bit Single Chip Microcontroller
● Low Power MCU (operating voltage 1.8 V, 0.5 μA/SLEEP, 2.5 μA/HALT)
● S1C17 High Performance 16-bit RISC CPU Core with C Optimized
Compact Code and Serial ICE Support
● Infrared Remote Controller with Carrier Generator
● 32K-Byte ROM and 2K-Byte RAM
■ DESCRIPTIONS
The S1C17001 is a 16-bit MCU that features high-speed operation, low power consumption, small size, large address
space, and on-chip ICE. The S1C17001 consists of an S1C17 CPU Core, a 32K-byte ROM, a 2K-byte RAM, serial
interface modules (UART that supports high bit rate and IrDA 1.0, SPI and I²C) for connecting various sensor modules,
8-bit timers, 16-bit timers, a PWM & capture timer, a clock timer, a stopwatch timer, a watchdog timer and 28 GPIO ports.
The S1C17001 is capable of high-speed operation (8.2 MHz) with low operating voltage (1.8 V). Its 16-bit RISC
processor executes one instruction in one clock cycle. The S1C17001 also provides an on-chip ICE function that allows
on-board debugging and evaluating the program by connecting the S1C17001 to the ICD Mini (S5U1C17001H) or ICD
board with only three wires.
■ FEATURES
● CPU ................................................. • Seiko Epson original 16-bit RISC CPU core S1C17
● Main (OSC3) oscillator .................. • Crystal/ceramic oscillator or external clock input 8.2 MHz (max.)
● Sub (OSC1) oscillator.................... • Crystal oscillator or external clock input 32.768 kHz (typ.)
● On-chip ROM.................................. • 32K bytes
● On-chip RAM .................................. • 2K bytes
● I/O ports ......................................... • Max. 28 general-purpose I/O ports (Pins are shared with the peripheral I/O.)
● Serial interfaces............................. • SPI (master/slave)
• I²C (master)
• UART (with IrDA 1.0)
• Remote controller (REMC)
1 ch.
1 ch.
1 ch.
1 ch.
● Timers ............................................. • 8-bit timer (T8F)
1 ch.
• 16-bit timer (T16)
3 ch.
• PWM & capture timer (T16E) 1 ch.
• Clock timer (CT)
• Stopwatch timer (SWT)
• Watchdog timer (WDT)
1 ch.
1 ch.
1 ch.
• 8-bit OSC1 timer (T8OSC1) 1 ch.
● Interrupts ........................................ • Reset
• NMI
• 14 hardware interrupts (8 levels)
● Power supply voltage .................... • Core voltage (LVDD) 1.65 V to 2.7 V
• I/O voltage (HVDD) 1.65 V to 3.6 V
● Operating temperature .................. • -40°C to 85°C
● Current consumption (typ.) ........... • SLEEP state: 0.5 μA
• HALT state: 2.5 μA (32 kHz)
• Run state: 10 μA (32 kHz)
1800 μA (8 MHz)
● Shipping form ................................. • WCSP-48pin plastic package
● Flash memory model for
developing mask ROM code......... • S1C17704
SEIKO EPSON CORPORATION