EV2101CA Datasheet, PDF (1/2 Pages) Epson Company – VOLTAGE CONTROLLED SAW OSCILLATOR

Crystal oscillator
VOLTAGE CONTROLLED SAW OSCILLATOR
EV-2101CA
Product number (please refer to page 4)
Q3831CA0xxxxx00
• 3.3 V operating voltage, Differential LV-PECL / LVDS output.
• Generates high frequency clock with fundamental mode.
• Very low jitter and low phase noise.
• Ceramic package with 2.0 mm Max. thickness.
• Excellent environmental capability.
• Low current consumption due to use of CMOS technology.
• Available for lead (Pb)-free soldering.
• Complete lead (Pb)-free product.
Actual size
 Specifications (characteristics)
Item
Symbol
Output frequency range
Power source
Max. supply voltage
voltage
Operating voltage
Temperature
Storage temperature
range
Operating temperature
Absolute Pull Range
Modulation Bandwidth
Current consumption
Output disable current
Duty
Output voltage
Output load condition (fan out)
Output enable disable input voltage
Output rise time
Output fall time
Oscillation start up time
f0
VCC-GND
VCC
TSTG
TOPR
APR
BW
Iop
IOE
tw/ t
VOH
VOL
VOD
ΔVOD
VOS
ΔVOS
RL
VIH
VIL
tR
tF
tOSC
Gain transfer
Kv
Phase jitter
tPJ
Specifications
LV-PECL
LVDS
77.760 MHz to 700.0000 MHz
-0.5 V to +4.0 V
3.3 V ±0.3 V
-40 °C to +100 °C
R : -5 °C to +85 °C, M :-40 °C to +85 °C
as per below table
100 kHz Typ.
70 mA Typ.
35 mA Typ.
6 mA Typ.
45 % to 55 %
2.35 V Typ. (VCC -1.03 to VCC -0.88)
–
1.60 V Typ. (VCC -1.81 to VCC -1.62)
–
–
247 mV to 454 mV
–
50 mV
–
1.125 V to 1.375 V
–
150 mV
50 Ω
100 Ω
0.7 VCC Min.
0.3 VCC Max.
400 ps Max.
400 ps Max.
10 ms Max.
200 x 10^-6 / V Typ.
250 x 10^-6 / V Typ.
1 ps Max.
1 ps Max.
Remarks
Please contact us for inquiries about the available frequency
Stored as bare product after unpacking
VC = 0.15 V to 3.0 V ∗1
Flat to ±3 dB Typ.
OE = VCC
OE = GND
at outputs crossing point
DC characteristics
Differential output, DC characteristics
Output change, DC characteristics
Offset
Offset change
____
LV-PECL: Terminated to VCC -2.0 V / LVDS: Connected between OUT - OUT
LV-PECL: 20 % → 80 % of (VOH - VOL) / LVDS: 20 % → 80 % of (VOD x 2)
LV-PECL: 80 % → 20 % of (VOH - VOL) / LVDS: 80 % → 20 % of (VOD x 2)
Time at 3.0 V to be 0 s
APR ±50 x 10^-6, -5 ˚C to +85 ˚C ∗2
APR ±100 x 10^-6, -5 ˚C to +85 ˚C ∗2
Offset frequency : 12 kHz to 20 MHz
Offset frequency : 50 kHz to 80 MHz
∗1 This includes initial frequency tolerance, temperature variation, supply voltage variation, reflow drift, and 10 years aging (As per below table).
∗2 For -40 ˚C to +85 ˚C, please contact us for inquiries.
Operating voltage
Frequency range (MHz)
Output mode
±50 x 10^-6 (-5 ˚C to +85 ˚C)
APR
±100 x 10^-6 (-5 ˚C to +85 ˚C)
±50 x 10^-6 (-40 ˚C to +85 ˚C)
±100 x 10^-6 (-40 ˚C to +85 ˚C)
P : LV-PECL
PGRS
PHRS
PGMS
PHMS
3.3 V
77.76 to 700
L : LVDS
LGRS
LHRS
LGMS
LHMS
 External dimensions
#6
#5
#4
1.4
#4
#5
#6
(Unit: mm)  Recommended soldering pattern (Unit: mm)
1.6
#3
#2
#1
#1
#2
#3
7.0 ±0.2
1.8 ±0.2
2.54
5.08
5.08
65
NO. Pin terminal
1 VC
2 OE
3 GND
4 OUT
5 OUT
6
VCC
2.54
5.08