EPC-1300-0.5-3 Datasheet, PDF (1/2 Pages) EPIGAP optoelectronic GmbH – Photodiode-Chip

Photodiode-Chip
Wavelength range
Infrared
Type
Planar
EPC-1300-0.5-3
16.05.2008
rev. 03
Technology
Electrodes
InGaAs/InP
Both on top side
Ø 500
typ. dimensions in µm
1
Ø 120
Ø 120
2
850 ±20
typ. thickness
330 (±20) µm
top side*
bond gold 1.0 µm
rear side
no metalization
* Bond pad assigment:
Pos. 1 - Anode
Pos. 2 - Cathode
Description
Broadband photodiode with
maximum response in the
NIR-region, no rear side
metalization
Applications
Optical communications,
safety equipment, light
barriers
Miscellaneous Parameters
T_amb = 25°C, unless otherwise specified
Parameter
Active area
Operating temperature range
Storage temperature range
Temperature coefficient of I_D
Test сonditions
T = -40…120°C
Symbol
A
T_amb
T_stg
T_C(I_D)
Value
0.196
-40 to +125
-40 to +125
7.4
Unit
mm²
°C
°C
%/K
Optical and Electrical Characteristics
T_amb = 25°C, unless otherwise specified
Parameter
Test
conditions
Forward voltage
I_F = 10 mA
Breakdown voltage²⁾
I_R = 10 µA
Sensitivity range at 10 %
V_R = 0 V
Spectral bandwidth at 50 %
Responsivity at 1300 nm¹⁾
V_R = 0 V
V_R = 0 V
Dark current
V_R = 5 V
Shunt resistance
V_R = 10 mV
Noise equivalent power
λ = 1300 nm
Specific detectivity
λ = 1300 nm
Junction capacitance
V_R = 0 V
1) _{measured on bare chip on TO-18 header}
2) _{for information only}
Symbol
V_F
V_R
λ
∆λ_0,5
S_λ
I_D
R_SH
NEP
D*
C_J
Min
Typ
0.8
5
800
680
0.9
250
0.5
1.0
1.1x10^-14
4.0x10¹²
45
Labeling
Type
Typ. I_D [pA] Typ. S_λ[A/W]
EPС-1300-0.5-3
Packing: Chips on adhesive film with wire-bond side on top
Lot N°
Max
1750
1000
Unit
V
V
nm
nm
A/W
pA
GΩ
W/ Hz
cm ⋅ Hz ⋅ W ^−1
pF
Quantity
*Note: All measurements carried out with EPIGAP equipment
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each application by the customers themselves.
EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201
Tel.: [phone], Fax : [phone]
1 of 2