ELC-690-21 Datasheet, PDF (1/1 Pages) EPIGAP optoelectronic GmbH – LED - Chip

LED - Chip
Preliminary
Radiation
Deep red
1000
Type
DDH
ELС-690-21
10.04.2007
rev. 03/06
Technology
AlGaAs/AlGaAs
Electrodes
N (cathode) up
typ. dimensions (µm)
typ. thickness
150 (±25) µm
cathode
gold alloy, 1.5 µm
anode
gold alloy, 0.5 µm
dotted, 25% covered
PoC-05
Optical and Electrical Characteristics
T_amb = 25°C, unless otherwise specified
Parameter
Test
conditions
Symbol
Min
Forward voltage
I_F = 20 mA
V_F
Typ
Max
Unit
1.7
1.9
V
Forward voltage²
I_F = 350 mA
V_F
1.9
2.3
V
Reverse voltage
I_R = 10 µA
V_R
5
V
Radiant power¹
I_F = 20 mA
Φ_e
1.4
1.9
mW
Radiant power²
I_F = 350 mA
Φ_e
60
mW
Radiant power²
I_F = 700 mA
Φ_e
100
mW
Peak wavelength
I_F = 20 mA
λ_P
680
690
700
nm
Spectral bandwidth at 50% I_F = 20 mA
∆λ_0.5
22
nm
Switching time
I_F = 20 mA
t_r, t_f
50
ns
1_{Measured on bare chip on TO-18 header with EPIGAP equipment}
2_{Measured on epoxy covered chip glued on a Ø 8 x 1mm Cu header (10 s after switched on) with}
EPIGAP equipment (for information only)
Labeling
Type
ELС-690-21
Lot N°
Φ_e(typ) [mW] V_F(typ) [V]
Quantity
Packing: Chips on adhesive film with wire-bond side on top
EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201
Tel.: [phone], Fax : [phone]
1 of 1