B82422H_12 Datasheet, PDF (5/8 Pages) EPCOS – SMT inductors SIMID series, SIMID 1210-H Ferrite drum core

SMT inductors, SIMID series
SIMID 1210-H
B82422H
Characteristics and ordering codes
L_R
PH
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
68
100
150
220
330
470
680
Tolerance
r5% ^{^} J
r10% ^{^} K
f_L
MHz
Q_min
7.96 10
7.96 10
7.96 10
7.96 10
7.96 10
7.96 10
2.52 12
2.52 12
2.52 12
2.52 15
2.52 15
2.52 15
0.796 20
0.796 20
0.796 20
0.796 20
0.796 20
0.796 20
f_Q
MHz
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
0.796
0.796
0.796
0.796
0.796
0.796
I_R
mA
1150
900
800
770
700
570
500
390
330
280
230
180
150
120
100
90
76
61
R_max
:
0.10
0.14
0.16
0.18
0.25
0.35
0.46
0.72
1.0
1.4
2.1
3.4
4.8
7.5
10.9
13.0
20.0
31.0
f_res,min Ordering code¹⁾²⁾
MHz ^{(‡ 180-mm reel)}
150 B82422H1102+000
110 B82422H1152+000
90 B82422H1222+000
70 B82422H1332+000
46 B82422H1472+000
35 B82422H1682+000
30 B82422H1103+000
26 B82422H1153+000
21 B82422H1223+000
15 B82422H1333+000
12 B82422H1473+000
10 B82422H1683+000
8.0 B82422H1104+000
6.0 B82422H1154+000
5.5 B82422H1224+000
4.5 B82422H1334+000
3.5 B82422H1474+000
3.0 B82422H1684+000
Intermediate values and closer tolerances on request.
Higher currents possible at temperatures <T_R on request.
Sample kit available. Ordering code: B82422X002
For more information refer to chapter “Sample kits".
1) Replace the + by the code letter for the required inductance tolerance.
For reel size ‡ 330 mm the last digit has to be an »8«. Example: B82422H1102M008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
5 12/12