B82442T1102M050 Datasheet, PDF (4/8 Pages) EPCOS – SMT inductors

SMT inductors, SIMID series
SIMID 2220-T
B82442T
Technical data and measuring conditions
Rated inductance L_R
Q factor Q_min
Rated temperature T_R
Rated current I_R
Saturation current I_sat
Self-resonance frequency f_res,min
DC resistance R_max
Solderability (lead-free)
Resistance to soldering heat
Climatic category
Storage conditions
Weight
Measured with impedance analyzer Agilent 4294A
at frequency f_L, 0.1 V, 20 °C
Measured with impedance analyzer Agilent 4294A
at frequency f_Q, 20 °C
85 °C
Maximum permissible DC with temperature increase
of ≤ 60 K at rated temperature
Maximum permissible DC with inductance decrease
ΔL/L₀ ≤ 10%, 20 °C
Measured with network analyzer Agilent 8753D, 20 °C
Measured at 20 °C
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
55/150/56 (to IEC 60068-1)
Mounted: –55 °C … +150 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Approx. 0.4 g
Please read Cautions and warnings and
Important notes at the end of this document.
4 10/08