B69842N5507A700 Datasheet, PDF (4/4 Pages) EPCOS – 2 - Pole Filter for WLAN 5GHz / [5150 - 5850] MHz

Microwave Ceramics and Modules
2 – Pole Filter for WLAN 5GHz / [5150 - 5850] MHz
Preliminary Datasheet
Processing information
! Wettability to IEC 68-2-58: ≥ 75% (after aging)
Soldering requirements
Profile for eutectic
SnPb solder paste
Soldering type
reflow
Maximum soldering temperature
235 (max. 2 sec.)
(measuring point on top surface of the component) 225 (max. 10 sec.)
Recommended soldering conditions (infrared):
Temp. [°C]
within 10 sec.
Temp. [°C]
215°C±10°C
Filter
B69842N5507A700
ZNr.: 577 (FILT95_2)
Profile for leadfree
solder paste
reflow
260 (max. 2 sec.) °C
250 (max. 10 sec.) °C
within 10 sec.
245°C±5°C
40-80 sec.
20-40 sec.
Time [sec.]
eutectic SnPb solder paste profile
Delivery mode
! Blister tape acc. to IEC 286-3, PS, grey
! Pieces/tape: t.b.d.
2.5 °C/s
2-3 min.
30 sec.
Time [sec.]
> - 5 °C/s
leadfree solder paste profile
t.b.d.
 EPCOS AG 2001. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto
and the information contained therein without EPCOS' prior express consent is prohibited.
The information contained in this data sheet describes the type of component and shall not be considered as guaranteed
characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the
Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers'
Association), unless otherwise agreed.
ISSUE DATE
18.09.03
ISSUE
P2 PUBLISHER
SAW MWC PD F PAGE 4/4