B43564E2338M000 Datasheet, PDF (4/20 Pages) EPCOS – Aluminum electrolytic capacitors

B43564, B43584
High ripple current  85 °C
Ripple current capability
Due to the ripple current capability of the contact elements, the following current upper limits must
not be exceeded:
Capacitor diameter
I_AC,max
51.6 mm
34 A
64.3 mm
45 A
76.9 mm
57 A
91 mm
80 A
Dimensional drawings
B43564
Ring clip/clamp mounting
B43584
Threaded stud mounting
The base of types with threaded stud and d = 91 mm is fully insulated (the lenghts I and l₁ are
increased by 0.5 mm in these cases). For types with threaded stud and d ≤ 76 mm the base is not
insulated. Also refer to the mounting instructions in chapter "Capacitors with screw terminals 
Accessories".
Dimensions and weights
Ter-
minal
M5
M5
M5
M5
M5
M6
M6
M6
M6
M6
M6
M6
Dimensions (mm) with insulating sleeve
d
l ±1
l₁ ± 1 l₂ +0/1 d₁
51.6 +0/0.8 80.7 87.2 17
M12
51.6 +0/0.8 105.7 112.2 17
M12
64.3 +0/0.8 80.7 87.2 17
M12
64.3 +0/0.8 105.7 112.2 17
M12
64.3 +0/0.8 143.2 149.7 17
M12
76.9 +0/0.7 105.7 111.5 17
M12
76.9 +0/0.7 143.2 149.0 17
M12
76.9 +0/0.7 168.7 174.5 17
M12
76.9 +0/0.7 220.7 226.5 17
M12
91.0 +0/2 97.0 102.3 17
M12
91.0 +0/2 144.5 149.8 17
M12
91.0 +0/2 221.0 226.3 17
M12
Dimensions are also valid for low-inductance design.
d₂ max. a +0.2/0.4
10.2 22.2
10.2 22.2
13.2 28.5
13.2 28.5
13.2 28.5
17.7 31.7
17.7 31.7
17.7 31.7
17.7 31.7
17.7 31.7
17.7 31.7
17.7 31.7
Approx.
weight (g)
220
280
370
440
630
620
840
1000
1300
1000
1200
1900
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 20