B82791G0014A017 Datasheet, PDF (3/6 Pages) EPCOS – Data and signal line chokes

Data and signal line chokes
Common-mode chokes, ring core
B82791G14
Dimensional drawing and pin configuration
2.8+0.5 8 max.
8
7
1
8
2₇
1
2
6
6
3
5 _10±0.2 ⁴
5
15±0.1
17.5 max.
3
4
IND0220-Z
Tolerances to ISO 2768-M
unless otherwise noted.
Dimensions in mm
Technical data and measuring conditions
Rated voltage V_R
Rated temperature T_R
Rated current I_R
Rated inductance L_R
Inductance tolerance
Inductance decrease ΔL/L₀
Stray inductance L_stray,typ
DC resistance R_typ
Solderability (lead-free)
Resistance to soldering heat
(wave soldering)
Climatic category
Storage conditions (packaged)
Weight
42 V AC (50/60 Hz) / 80 V DC
60 °C
Referred to 50 Hz and rated temperature
Measured with Agilent 4284A at 0.1 mA, 20 °C
Measuring frequency: L_R ≤ 1 mH = 100 kHz
L_R > 1 mH = 10 kHz
Inductance is specified per winding.
±30% at 20 °C
< 10% at DC magnetic bias with I_R, 20 °C
Measured with Agilent 4284A at 5 mA, 20 °C, typical values
Measuring frequency: L_R ≤ 1 mH = 100 kHz
L_R > 1 mH = 10 kHz
Measured at 20 °C, typical values
Sn96.5Ag3.0Cu0.5: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 95%
(to IEC 60068-2-20, test Ta)
(260 ±5) °C, (10 ±1) s
(to IEC 60068-2-20, test Tb)
40/125/56 (to IEC 60068-1)
–25 °C … +40 °C, ≤ 75% RH
Approx. 4 g
Please read Cautions and warnings and
Important notes at the end of this document.
3 10/08