B82732W2901B30 Datasheet, PDF (3/6 Pages) EPCOS – Power line chokes

Power line chokes
Current-compensated D core double chokes
B82732R/W
Dimensional drawings and pin configuration
Vertical version (B82732R)
Horizontal version (B82732W)
1
2
1
2
4
3
12.5±0.2
24 max.
4
3
8.3 max. 14.8 max.
90_{˚ ±5˚}
0.6
Tolerances to ISO 2768-cL unless
otherwise noted. Dimensions in mm.
Technical data and measuring conditions
IND0287-U
Rated voltage V_R
Test voltage V_test
Rated temperature T_R
Rated current I_R
Rated inductance L_R
250 V AC (50/60 Hz)
1500 V AC, 2 s (line/line)
+40 qC
Referred to 50 Hz and rated temperature
Measured with Agilent 4284A at 0.1 mA, +20 °C, 10 kHz.
Inductance is specified per winding.
Inductance tolerance
–30/+50% at +20 °C
Inductance decrease 'L/L₀
Stray inductance L_stray,typ
DC resistance R_typ
Solderability (lead-free)
< 10% at DC magnetic bias with I_R, +20 °C
Measured with Agilent 4284A at 10 kHz, 5 mA, +20 °C, typ. val.
Measured at +20 °C, typical values, specified per winding
Sn96.5Ag3.0Cu0.5: +(245 r5) °C, (3 r0.3) s
Wetting of soldering area t 95% (to IEC 60068-2-20, test Ta)
Resistance to soldering heat +(260 r5) °C, (10 r1) s
(wave soldering)
(to IEC 60068-2-20, test Tb)
Climatic category
40/125/56 (to IEC 60068-1)
Storage conditions (packaged) –25 °C … +40 °C, d 75% RH
Weight
Approx. 11 g
Approvals
EN 60938-2, UL 1283
Please read Cautions and warnings and
Important notes at the end of this document.
3 06/13