B82726S6103N001 Datasheet, PDF (3/6 Pages) EPCOS – Power line chokes and DC intermediate circuits

Power line chokes and DC intermediate circuits
Current-compensated ring core double chokes
Dimensional drawings and pin configurations
B82726S6103N001
B82726S6123N020
18±0.4
1
2
Marking
12
35.65±0.4
1
2
B82726S61*3N
12
4 _42±0.8 3
50 max.
43
27.5 max.
4 _42±0.8 3
52 max.
Marking
43
28 max.
ø1.6±0.1
Dimensions in mm
IND0692-V-E
ø1.8±0.1
IND0693-B-E
Technical data and measuring conditions
Rated voltage V_R
Test voltage V_test
Rated temperature T_R
Rated current I_R
Rated inductance L_R
Inductance tolerance
Inductance decrease ΔL/L₀
Stray inductance L_stray,typ
DC resistance R_typ
Solderability (lead-free)
Resistance to soldering heat
(wave soldering)
Climatic category
Storage conditions (packaged)
Weight
250 V AC (50/60 Hz) / 750 V DC for intermediate circuits
1800 V AC / 2500 V DC, 2 s (line/line)
85 °C
Referred to 50 Hz and rated temperature
Measured with Agilent 4284A at 10 kHz, 0.1 mA, 20 °C
Inductance is specified per winding.
±30% at 20 °C
< 10% at DC magnetic bias with I_R, 20 °C
Measured with Agilent 4284A at 10 kHz, 5 mA, 20 °C,
typical values
Measured at 20 °C, typical values, specified per winding
Sn96.5Ag3.0Cu0.5: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 95% (to IEC 60068-2-20, test Ta)
(260 ±5) °C, (10 ±1) s
(to IEC 60068-2-20, test Tb)
40/125/56 (to IEC 60068-1)
–25 °C … +40 °C, ≤ 75% RH
Approx. 115 g
Please read Cautions and warnings and
Important notes at the end of this document.
3 10/08